Autoleveling xenons

[Zelenac]

Hallo
I have retro fitted original xenon headlights, have washer jets, but i have not autoleveling and I have few questions about this.
What I need for autoleveling?
Is it there 2 or 1 sensor?
Is it there some extra control unit for autoleveling?
I was looking for harness for conecting sensors and headligts in ETCA but i could not find it. What number have harness?
Have anyone retro fitted autoleveling? Please give me some advices for instalation.
Thank you in advance for answers.

 

[R1ch85]

I've not retrofitted autolevelling myself, but im led to beleive that a suspension level sensor should be fitted in the passenger door, although I don't know how it is connected at all.

http://www.vagcat.com/epc/cat/se/IB/2004/254/57/4742939/

Have a look there ^^^ You may need to sign up, but its free and extremely useful.

 

[techie]

The level sensor goes on the rear beam on the n/s. Wiring loom is part of the main harness. There is a control unit for it as you need to set the self leveling with VAG COM.

 

[Zelenac]

To R1ch85:
Thank You I will try it.


To techie:
It is perfect that i do not have to search for harness. I do not understand exactly, the control unit is part of harness or control unit for leveling is main control unit for whole car? So I have to buy only sensor?
Thanks

 

[Zelenac]

Hallo again
I bought used sensor for 20Eur, but it is not hte same part number. It is, 4B0 907 503, from SuperB or Passat. My question is: how many pins have conector in original sensor(this one hase 6)? Can I instal this sensor to my car?

 

[tony_tigger]

i c there are a few sensors, think you have the wrong one? and you need the brackets but its just the rear sensor you need i think and it doesn't mention the control unit on the website but who knows!

 

[Zelenac]

Thanks for the replay, I found article about these sensors on Polish side and I bought everithink what I need. I paid about £150 and I hope that it will work like original autoleveling.

 

[tony_tigger]

yeah, i found a spanish site where someone had done it... See it is only one sensor on the ibiza from the tech diagrams...
Did you make your own lead for the sensor? Assume u didn't get a control sensor? and do you know how to wire up the sensor?
I have vagcom so if your local can help you set it up?!?!