alloys

[ian_1006]

Hi, after some advice

recently purchased mk3 cupra few weeks back and looking to upgrade the alloys as the current ones are looking abit tired lol. Seen set of keskin kt4 16 x 7.5, 4x100 wrapped in 205/40/16 for a good price and local. First of all after much searching and research im thinking these will fit?... however im abit of a novice in all honesty so just wondered if anyone could confirm/reassure me that they will indeed fit. Car is lowered and has 15mm spacer on the rear, so if i did purchase them would they would fit straight on? and wont have issues with rubbing scraping etc etc...

cheers ian

 

[Tucker157]

To work that out you'll need to know the offset (ET) of the wheels,

Then go to www.willtheyfit.com and plug your numbers in the boxes!


Sent from my iPad Mini using Tapatalk HD

 

[wezza12]

Same as above its all about offset

 

[Tucker157]

Same as above its all about offset

Good statement! You can use offset to create a very wide stance.... But it's not as good as actually widening the track... But that's physics and another conversation!


Sent from my iPad Mini using Tapatalk HD

 

[Chambers_CUPRA]

I had keskins on me old cupra KT5s iirc

 

[Chambers_CUPRA]

ET 35 iirc no spacers

 

[ian_1006]

Cheers for the replies, missed out the offset Haha its et35 all round, so thats why im assuming they'd fit?

 

[Chambers_CUPRA]

Should do

4x100 amd 57.1 bore iirc or correct spigot rings

 

[ian_1006]

Hmm ok, well alloys are in rugby and im from coventry so not far to travel so will go view um and see whats what! just find wheels, offsets etc Confusing.

 

[yellonvi-R]

Just sold some bbs cvs off a Cupra 4x100 et38

 

[Chambers_CUPRA]

The alloys are in rugby? Where abouts i live in rugby, brownsover.

 

[wezza12]

I have borbet as 4x100 et 20 with spigot rings
They rub a little on the back but I can deal with it as they are also 9j alround and look the tits

 

[ian_1006]

not too sure the exact area in rugby, said if there still aorund on saturday then ill go see um then so aint got the address yet. Think the last stumbling block will be the centre bore, asked the bloke to confirm the size, its either going to be 57.1 which would be buzzing or 56.1 which would be a bummer, but not the end of the world?? liking ur cupra chambers, mines imp blue just needs a damn good clean from all the salt they keep putting down on the roads!

 

[ian_1006]

Christ wezza, nooo way id get away with running 9j all round, route to work would be unbearable lol, although i can imagine it'd look decent!

 

[Chambers_CUPRA]

Thanks mate

How long you had the cupra seen 1 or 2 in cov when taking the mrs shopping haha

 

[ian_1006]

Haha not had it long bout 3weeks or so, had a mk2 ibiza 8v and 16 before this so just enjoying turbo power atm Lol. U often about in cov are ya....

 

[wezza12]

Here is a pic

 

[wezza12]

I also got some alloys forsale just check my rr there the oz wheels there on eBay at the min

 

[Zippyobrien]

I've got seat cupra r oz alloys. Lowered 60 mm. With lightly rolled arches and 20mm spacers. And it runs just a little

Gunna skim them down to 16mm.