Advice needed - Logs attached

Jonzy

Guest
Advice - Logs attached - Updated results!

Did 2 tonight logging 003,020 & 115 - running esso 97sul .. heres the results

1st one is a 3rd gear run

Clicky

2nd is a 4th gear run

Clicky

Advice welcomed, I know the MAF is reading low but im concerned about the CF stablisation being high... poss due to the MAF? :)
 
Last edited by a moderator:

Jonzy

Guest
Picked up a new maf this morning (ecp £60), will relog it again tonite and fingers crossed it should solve the problem :)
 

Jonzy

Guest
Cheers fella, hope it works otherwise im in the same situation as you.... same error code!
 

ibizacupra

Jack-RIP my little Friend
Jul 25, 2001
31,333
19
glos.uk
MAF is just over 1/2 what it should be reading.. so plenty to be fixed by a working one being in there.
 

Jonzy

Guest
Just fitted it in the carpark, took it for a drive and it feels slower, much slower. Will do a tba tonight and then re-log it.

Is the aqx engine dbw?
 
Last edited by a moderator:

Simon L

Audi TTS
Sep 24, 2004
1,253
0
Glasgow
Didnt know AQX came in the Ibiza. Thought it was only AYP.

Also, youre block 020 logs, the CF's values are very high. This shows a high amount of retard. Yes? No?
 

Jonzy

Guest
I passed judgement too early on the new maf, its transformed the car. Maf logs at midnight when the 'private airfield' is queit ;)

Im hoping that the CF's should drop now... only vagcom can tell.
 

Jonzy

Guest
Took it for a little run and logged this

Clicky

CF's are 0's and peaked 136g/s @ 100% load

Will get a better run tonight for a real result, but its looking good :D :D :D :D
 

Jonzy

Guest
Cant remeber, possibly 2nd - just backed it off in the traffic and pinned it :cry: :D
 

Jonzy

Guest
Just got back from another logging session - looks like the new maf has solved the
problem

Clicky

4th gear run

Comments welcome :)
 

Jonzy

Guest
yep, think the speed was indicating 125-30. Woulda pushed further but didnt see the need and was running out of road.