spacer

Greetings all the way from Egypt! I own a 5dr hatch that came with 17s as standard (SE?). I wanted to change the wheels but could only go with 18s because of the seriously crappy roads over here. The wheels are 18x8j with a ET45. I'm looking to close that nasty wheel gap and have a nice stance...

hi ppl, are forge spacers actually bad 2 fit to the mk2 leon FR, herd from a few companys they arent to good when fitted..... anybody else herd of this

hi what is the max width spacer i can use on standard wheel bolts. was hoping 5mm would be ok.

hi ppl, anybody no how 2 fit a spacer on a leon fr tfsi please, or anybody know were i can get instructions from as the one i bought from forge didnt have and fitting instructions, sound

Ive had my FR lowered on eibach sportlines and want to space the rear wheels about a bit as they look lost now, was just wondering what most people go for? Can get a set of 16mm spacers (8mm each side) what length bolts would you need? Cheers, Josh

Hi guys need to get a hold of some lambda sensor spacers as i have taken my cat off my car and if keeps throwing up cel light and putting it in gimp mode. Now does anyone know where i can get these from and if i'd need just the rear lambda sensor or if i'd need one front and rear? cheers guys

just got back from having the spacer fitted and service done. ace sounds well and its a loud whoosh haha keep reving her up. cheers to kev who sorted me out with it!;)

http://www.seatcupra.net/forums/showthread.php?t=258411 Just thought someone might be intrested in this, bit far for me to drive :)

Any one no a thread that shows how to fit the forge blow off spacer cheers

How do all!! Basically had a set of 4 15mm spacers on the leon, which with them being the same PCD i assumed would fit on the beeza. However i cannot get a flush fit to the rears even with the hub nut cap taken off. Theres literally 2-3mm in it. Im assuming that its to do with the...

Just trying to buy some wheel spacers of ebay done a search and all the links that i have found arnt selling anymore . Can someone link me to some suitable 20 mm ones i dont want to end up buying ones for a older model ibiza :confused:

Hi guys. I have the Mk2 Faceflit 2.0T Cupra. Anyone got any part numbers and costs for a dump valve and the spacer that makes the wooosh noise? Many thanks guys. And Merry Xmas to all.

Ok,i've just fitted some new wider alloys to my Altea! and fitted 5mm spacers to the rear to bring them out to match the front! But when i looked at it,the passenger rear looked out more than the drivers side! so i got the spirit level and tape measure out,and the passenger side sat 7mm proud of...

I'm looking to replace the current bolts that were issued with the 40mm (20mm each side) hubcentirc spacers from FK automotive as they're rather rounded and beaten. Had a look on europerformance and venommotorsprt but had no luck......so yes, please help. Bolts are 42mm in length and are...

after fitting 15mm wheels spacers the car feels better def handles better but at speed it feels like the tyres are not balanced properly it was fine before the spacers where fitted any ideas ?? :confused:

Had my 10mm spacers on now for a week and at normal driving speed the car feels great but when i am on the motorway and take it up to 80 plus the cars feels a bit unsteady....its like there is a vibration or a wobbley feeling to it. Not really sure what to do, dont know if its becuase the...

I have recently got some 15mm FK wheel spacers for the rear of my Mk4 FR I fitted them yesterday with longer wheel bolts from Bdager Bill After i tightened the bolts up I span the wheel round while it was jacked up and all seemed fine. Started to head off to work this morning and Was...

Hi, I've just got a Phenolic Spacer for my inlet manifold but need to know what parts i need for fitting it. I will need longer manifold bolts but i am unsure of what size i need, i think the original bolts are M6 x 25mm long??? Does anyone know for definate the size or the bolts and...

Gallardo alloys Hey was wondering from the guys who have previously bought were they got them from and their thoughts. Defo getting a set but cant find heaps about other than fleabay and not sure if they are any good. Kerbed alloy thismorning (DAMN snow) and reckon its time for mods to start...

When i eventually get my car back from the stealers :headhurt: , 1 of the first mods to do is change the forge dump valve , but what are peoples opionions on the spacer? is it too chavy? or does it sound ok? can it be made quieter once its on there or does it have to be removed? all...