slip

Looking at getting a Cupra 280 and am hoping someone can confirm that the 280 has an LSD stock from factory? Cheers! :)

I have had a good look to see a similar question been asked but i recon my case is different. if i have been driving my lcr more exuberantly than the norm over a period, say round a few twistys then up the slip road and on the motorway, i notice what seems like my clutch slipping. at 3000rpm...

Hi had my APR Stage 2 completed over 2 years ago and 14000 miles. Currently running just over 300 BHP and 360 lbft torque. Done 2 track days and a weekend at the Ring in the past. To be honest I dont drive the car very hard but in the last few weeks the clutch has started to slip when changing...

Ive got a 2005 leon FR which has just been remapped by AMD, it has only covered 25K miles but after having it remapped the clutch is now starting to slip. Is the standard clutch capable of handling the additional torque or do i need to uprate the clutch?? Does the 180bhp cupra have the same...

Hey everyone, I'm looking at getting my ecu re mapped and having the dpf removed as well as the full exhaust done. :D One thing I have thought of was with all that extra power; wouldn't it be wasted with an open diff?? :cry: I've looked everywhere and can't seem to find proof that the FR...

I am just wondering if any of you lads are planning on a diff in 2010 and if so which one. The only person I know of so far with one fitted is Dan. I am pricing up a Wavetrac one at the moment with view to fitting it in early 2010. Ta, Horace

Was just driving around yesterday, and went to overtake a car. Doing about 60 in 4th, and put foot down. Now the revs built up to around 3000rpm, then i started to speed up... So looks liek between 2000 and 3000rpm i'm gettingclutch slip. It is worse in high gears. Like 6th on teh motorway...

Any one had clutch slip in a TFSI yet, I noticed it a few times over the last couple of weeks. Strangely enough only since I fitted a milltek downpipe. It only ever last a couple of seconds when the car is at about 3k revs it shoots up to nearly 4k revs for a few seconds and then returns to...

Coming from a scooby with Goodyear Eagle F1's I was used to stunning traction wet or dry. However, yesterday in my LCR the roads were pretty wet and round a few roundabouts, where I was taking it quite easy as I'm still getting used to the car and just being careful, I had some very noticeable...

does anyone know if a limited slip diff was ever fitted to 8v cupra sports as standard or even an option from seat ? , mine appears to have one but unsure if its standard or not , i dunoo my gearbox code but i think its o2o as it is cable clutch rod shift . thanks cole

Hi all. Had my PD130 remapped by P Torque around 6k miles ago. Over the past few weeks I've noticed that after a long run, I park up take the car out of gear with the clutch up ticking over and I can hear a rythmic knocking/ rattling every 5 seconds. I am fairly sure its the flywheel as...

hi, experienceing clutch slip after remap, esp in 3rd and 4th from 2k to 3.5k. i know this is a talked about topic but my quiery is that when i do boot it and the clutch seems to slip, the revs either stay at the given figure on the rev meter they are on or they drop a little bit and hoverup and...

Not sure if it's me flappin but noticed recently that when changing from 1st to 2nd to 3rd and my foot clear of the clutch my car seems to 'slip' and not get a lot traction and this is making me think that either my clutch is on the way out , or its greasy road surfaces ??. combined with...

Noticed the other day that the clutch seems to be slipping in first gear from 2000rpm even at half throttle sometimes. Had a search on the forum and some threads said to test by flooring it at low revs in high gears. No slip doing this or in any other gear just seems to be first. Dont think...

Hi All I just recieved an estimate from a stealer for a new rear door. On the the model specs that they searched for using my VIN number it states that the car has an electronic limited slip diff.. Is this true? I can see that not all the spec on the estimate is correct because as my car...

Is it possible to get clutch slip on a standard fr tdi? i ask only because i picked one up yesterday and it seems to slip in the higher gears when you nail it from lower down, so i presume its been remapped...

As above really, just had new clutch and flywheel fitted but it slips under full boost. Does it need bedding in? If so, how many miles roughly? Or should i be going back down the garage with a stick.

Sorry for such a silly question, but I have a remapped FR TDi with a standard clutch. It has about 4,000 miles on the clock. What are the signs of clutch slip? Been hearing that the standard clutch is not up to much, and although I may be imagining it, I feel the power not coming in as punchily...

Revo'd Cupra Mk4 180 Clutch Slip Hey guys, urgent one, just test drove the above, it has 26k on the clock, 54 plate and it has a stage 1 Revo, but it is clutch slipping in 4th and 5th gear.. Stealer reckons it will pass once it has warmed up as it has been sitting there for a few weeks...

Had my FR150 mapped monday. When mapped and testing car the roads were wet so wheels spun in third (never got to really test it in 4,5,6). After when the roads were dry it started slipping the clutch in third at just over 2K, will do this in 3,4,5,&6 gears. It also is now chucking out a bit more...