scan

  1. JamJay

    Fault Scan Surrey/Sussex/South London

    Hi all. I need a fault scan doing to check why I have an EML on at the moment. No driveability issues but I need to know what's going on. Please Help! My laptop is broken :(
  2. kineticz

    Scan gauge

    I've noticed they've changed the Scangauge for one with a very small screen, whereas they used to have a 3 inch screen I think it was? Do they still sell the ones with larger screen? I know LEE69 has one. Any help on where to get them if so and why they changed to the smaller screen would...
  3. cupramillo

    Help with VAG com SCAN results

    Hi, can anyone shed any light on my VAG com results i got from tonights scan. Sunday,29,November,2009,18:57:07:56783 VCDS Version: Release 908.1 Data version: 20091018 --------------------------------------------------------------------------------...
  4. LCRglen

    scan results

    in case any body has not read any of my threads on my car its a 03 lcr with a missfiring problem / juddering . big thanks to andy for scanning my car . what i need to get is can someone who knows what there looking at see anything wrong with the scans etc.
  5. chris_200120vt

    scan guage 2

    thinking of buying one of these would just like to know what they are like and are they a multifit as i already have a vw fault code reader but had a look at one on ebay and made think of getting one as i like my gadgets so the other half says:lol:
  6. VAGCOM scan results

    OKay, I have: *00283- Front Left ABS wheel speed sensor (G47), 012- Electrical Fault in circuit *00792- A/C Pressure Switch (F129), 35-00 - - Anyone able to assist? I believe the top one would be sorted by fitting a new ABS sensor, is this correct...
  7. scan of my leon what wrong

    this a vag com scan of my seat leon 18 20 vavle turbo cupra on a 51 reg i have do the n75 bypass if that helps Chassis Type: 1M - Seat Leon Scan: 01,02,03,08,15,17,19,22,35,46,56 Address 01 ------------------------------------------------------- Controller: 06A 906 032 HN...
  8. Big Ejit

    VAG.COM Scan required S B'ham area Please!

    Would someone in the South Birmingham area be willing to read off the fault codes on my LCR for me please? TCS light came on 4 times today requiring a key off each time to clear it. From searching older posts on here, it looks like a classic MAF problem but i would like to confirm it before...
  9. VAG-COM Scan Question

    I am about to connect to my car using an HEX-USB+CAN Interface, can any problems be caused by scanning the car? Reason I ask, is that there used to be an issue with air bag controllers, so you could tell the software not to scan this, is this still an issue, or will I be safe? I have used...
  10. Punch IT!

    vw audi/seat hand held scan tool!

    Hi all, My hand held vag scanner arrived today, only £30 from ebay, now I can finally get rid of that annoying yellow engine check light!:funk: The faults i found are as follows: 17705- Connection turbocharger - throttle valve pressure hose 17545- Long Term Fuel Trim...
  11. Autonostics VAG-COM Lead - Starts scan then stops!

    Thought I would finally take the plunge and post something! Unfortunatley for you guys it seems to be quite a well discussed area which causes some annoyances :censored: In the post I've read anyways! I, like others, bought a autonostics cable from ebay and am having an issue. Firstly, the cable...
  12. Cupra20

    Scan Gauge 2 OBD reader

    My mate was recommended to get one of these for his car and just wondered if it would fit the ibiza diagnostics plug? http://www.scangauge.net/products/product.html Has anyone fitted/used one and would it be better than Vag-Com Tim
  13. Scan request for Bucks area

    Hey guys. I'm in the south Bucks area. I've recently had the car remapped and am noticing a kind of flat spot between 3.0-3.5k rpm range. Performance torque is a 2 hour+ drive away so I don't fancy driving back up there unless I really have to! If anyone is within a not too silly distance and...
  14. freddy_t

    Need a vag-com scan Bristol/somerset area

    Got an ibiza cupra and the engine management light is on. can anyone help out and give it a scan to see whats up? Thanks fred. ps im in the bristol/ weston-super-mare area
  15. Scotty_b

    Cant auto scan??

    Right ive finnaly got my VAG com working again but when i go to auto scan it throws up another screen (has company info and esc=stop run, on it) it then show ssome time counting down and fliks my ABS light on and off and TCS light and says address 2 then 3 etc. Any ideas?
SEATCUPRA.NET Forum merchandise