required

  1. Blown Turbo , Help Required

    Hi everyone , First time poster after a little advice, I purchased an 06 Leon 2.0 DSG in september with 22k miles on it from a dealer, since then ive done 6k miles but 3 weeks ago the turbo blow up on it. The garage have had it since then and rang yesterday quoting me £1700 for a...
  2. Please Help, Urgent Parts Required !!

    Hi all, I'm looking for an ECU and Loom to suit an ARY Engine (1.8T 20V) 2003 I'm doing a 20VT conversion on a Mk2 golf. This ARY Engine is found in an Audi TT, Seat Leon, Audi A3, The engine i have is from a TT Does anyone know where i could source them, or know anyone that...
  3. psycho6285

    Part number Required

    Hi I require the part number for the pipe that goes from the TIP to the Breather Regulator Vavle (PVC Valve, Mushroom looking thing) Any Help would be brillian as mine is very very soft and kinked now i have fitted a TIP Many Thanks
  4. Zappa

    Major car problems tonight after a cruise - help or advice required please!

    Hi all, driving a 2004 Ibiza, 1.2, 50k Miles. I took a drive up to the coast tonight with a few mates (30miles). You may have seen a thread I posted up a couple of weeks ago about changing the air filter and cleaning the spark plugs - Ever since then, the car has been shuddering between...
  5. kez

    REQ: closeup pic of LCR bonnet catch required

    my LCR's been off the road for almost a year now, and it's time to get it back on it. however, obviously, the battery has run out and needs changing. however, i am unable to get the bonnet open. the interior handle works, and i've popped it up to the first stage. no amount of prodding...
  6. Login code required to recode abs controller

    I really could do with some help.I Have just changed the ABS pump for the second time on my 1997 ibiza cupra 2.016v.This time its definately the right unit,the controller is 3A0 907 379A and the pump 1H2614 217B. I made a note of the shop code and soft code numbers from the old unit and re...
  7. Leon Mike

    New Springs Required....

    Just failed the MOT on the old broken rear springs, common apparently. Our Leon has done 173k now so that's a fair whack on what I presume to be the original springs. Was going to order some o.e springs today @~£56+vat each (rear) Having looked at a few websites I see you can get koni etc for...
  8. karlw

    tracking required??

    If you had a set of wheels on that were on with spacers and then go back to the original wheels with the exact same size tyres as the ones with spaces would you need to have the tracking re-done?
  9. Vag com around sunderland area required

    hi guys, just bought a leon cupra and ive got some warning lights on, i was referred to this section in the hope that someone can help me out with vag com. id appreciate it if anyone local can get in touch. many thanks guys
  10. bmb779

    gold fish required

    washed the car today and noticed when drying it off that the o/s tail lamp which is in the tailgate is filling up with water,is this a common fault and is there a fix?
  11. Help required with my leons body style

    hi people ive just bought myself a leon cupra and its been modified as far as the performance goes. It has been remapped to 225 bhp with additional things such as air filter, dump valve exhaust etc etc, im not clued up in any of these all i know is that it is very quick and responsive. my car...
  12. LandanSam

    Socket Required!

    Hey People! I am after a socket to take off the nut that is on the end of the driveshaft that keeps the CV joint locked onto the hub. Anyone know what size and style socket i need as i've yet to take it all apart and wanted to buy the socket ready for the weekend! Help would be appreciated...
  13. Urgent help required

    Been out in my cupra today. On the way home a warning light came on. Checked the manual and its the diagnosis / excess pollution light came. :wtf: Got home switched off the engine turned the engine back on, light still on. In the manual it states that it should go off after a few seconds...
  14. ZBOYD

    Std Mk1 LCR required for EVO mag photo-shoot - Friday 29th Jan

    Nope this is not a wind-up. :) Care of SEAT UK I have been contacted by Brett from EVO Magazine. EVO need to urgently get their hands on a cosmetically 'un-modified' Mk1 Leon Cupra R (either 210 or 225) for a photo-shoot that is taking place this Friday (29th Jan). They are doing a used car...
  15. radiator removal help required

    i need to replace my radiator 02 tdi do i have to remove front bumper to do the changover.
  16. Stage 2 Custom map, whats required?

    Hiya guys, ive recently purchased an 03 Leon Cupra. Being 22, its a car im real fond of and have some big plans for. The whole remap scene though for me is a new one. Its been mapped already and is running at approx. 210bhp. Thats stage 1 out the way. Ive now got the finances ready to make a...
  17. Bluetooth information required

    I've just finished installing an aftermarket bluetooth head unit into the daughters fiesta and to be honest now I feel a bit jealous:( My facelift O9 1.4 sport has the steering wheel controls for the phone etc but having trawled through the search function I still have a few questions that...
  18. Darron1823

    Mods required for bigger BHP on 2.0L TDI sport

    Hey folks, I have an 06 2.0L TDI Sport 140bhp and I am looking to take it up and over 200bhp now I know I will have to uprate the clutch and fly wheel but not sure if this is available for my model but what other mods would be required to achieve this, bigger injectors, turbo, custom re-map...
  19. Aftermarket wheel fitment - help required.

    Hi I have just bought a 54 plate Ibiza Cupra TDI and looking at changing the wheels and fitting coilovers. Does anyone run 19's and if I go with 18's what is the widest I can go at the rear without going outwith the arch and what is the widest at the front to still get full lock -...
  20. Special tools needed to strip car?

    Hi All, The bottom bearings have gome on my V5 so I am goijg to strip the cr of all its parts and then srap the shell. I had a look around the car today and I need to get some star like tools to get the doors of the car. Does anyone know the size that is needed? Are there any other...