project

• Full Sound Insulation: Currently, there is no area left without sound insulation except for the doors, roof, and floor of the vehicle. This sound insulation also provides thermal insulation to some extent. In this application, which generally consists of 3 layers, I continued by applying only...

Completely new to this forum so figured I'd make a bit of a thread on this little project I've acquired It's a 1.9 TDI 110 SE, it's had a remap and had the Cupra R kit very poorly stuck on to it (If anyone has either the Cupra or Cupra R front bumper for sale I'd be interested! As previous...

Recently purchased a Leon, I’ve wanted a project car for a long time and the Leon has the right mix of practicality and looks. Bought as stock, idea was to invest in an unmodified car initially and build it up over time. Car has full service history, 112k miles, no major issues. Paid £2050 after...

Hi All, A newbie to the forum so bear with me and please ignore the username! Looking for a MK1 supercopa wing. My son's doing a BEng at the University of Bolton Motorsports centre and has taken on a 'project'. We're trying to source the original MK1 Supercopa wing... Any suggestions please...

Project PD150 　 Some of you may know I’ve been modifying my golf over the years and edited this thread to show a bit up to date information. I ran the car on a stage 1 remap for approx 2 years. After this I done whole load of work and research to reach a MAX power figure of around 230hp...

Last weekend I bought a 2002 Seat Toledo with 70k on the clock as a 2nd car just to use as a daily driver so I can get some good MPG on the way to work and on any long journeys I do. So far it's been great! Climate control, CD changer, Electric windows all round, parking sensors, Trip...

Ladies and gentlemen of SCN, The time has come to announce i am now the proud owner of a 2003 (03) Black Leon Cupra (180). :funk: It's been a long and exhausting search but it feels great to drive and to have. :D There are a few minor teething problems to be sorted mind you but...

Hi , Im new to the seat scene and got to say im impressed by the ibiza ive recently purchased. Im currently progressing through tidying it up considering I picked it up cheap and in need of abit of work. This is how I picked it up: -bonnet looks as though its been keyed and laquer...

I'm sure this wont bring many good replies lol, but here is my car... Basic spec was: 45mm ITB's 120mm Ram pipes Cat Cam 421's (wildest possible on standard pistons) Standard exh Mani Decat, into a full 2.5" exhaust Lightened flywheel Pico 350cc Injectors Cometic H/G No AC No PAS...

Well the Ibiza went around 6 weeks ago and I swapped it for a SWB VW T5 panel van....which the work then began on! Full conversion, gas, electric, windows put in, rock n roll bed.... Next plans are alloys, body coloured bumpers...and a holiday away!!!

After reading allens (DjHorace) thread i thought it was good to see how everyone has modified there cars and what experiences we have all had so here it goes. I went to test drive the cupra down in paisley one afternoon, arrived at the dealer to find out the demo was away for the day so...

Well heres my Ibiza, its not amazing but I like it, it isnt finished yet, far from finished. Heres what Ive had done to it so far: Octavia vrs alloys, Spax 45mm lowering springs (only got rear on atm front going on this week), tinted back 3 windows, debadged grill, debadged rear, custom pipes...

Ok, here we go, After several years of driving some larger and less sporty cars (my last one is an Audi A6) I have decided that the wife should drive those and I will get myself a new toy. After some considerations and test driving several cars like the STI , GTI and the S3 the decision has...

just mocked up the interior on my Cupra, to work out where everything will bolt in. as usual with this car, clearances are tight, but it looks like I can make it work. video on youtube - can someone clever do a link? and, yes - the door does close!:)

hi all just thought i wud show you all a few pics of my car i got it in october 2009 completely standard,i am planning to do a k04 turbo conversion mods so far scorpion cat back k&n induction kit uni FMIC (fitted this weekend) n112 valve removed n249 valve bypassed replaced all...

My mate was running this Toldeo for a good few years until it started to let in water. Due to it becoming like a swamp he stuck it away in a lock-up 20 months ago and forgot about it. Just before Christmas I asked him what had happened to it and he mentioned that it was still in the lock-up so...

Been on here for a few months but finally got my Leon Cupra R at the weekend. I bought it off a pal that's had it for the past 4 years. It's in good condition but needs a bit of TLC in areas. It's probably been washed about twice in those 4 years aswell so a good clay and polish/wax will be...

OK, so its not a SEAT .....I have gone full on Dub.... but for those that know me its no shock as my plans have been no secret. Were talking mk3 Jetta's otherwise know as the Vento. My search began some 12/18 months ago after seeing one parked up. Slammed to the ground and rolling on g60...

hi i have been on here for two years or so now and thought i would finally put something up on here as i have read through alot and have been inspired by some, as with all cupras they have there problems which im sure you have all encountered well here is the list of current mods to date...

i just bought meself a 2.0 cupra 8v and i cannot believe the state its in: headlight is hanging out, boot trim keeps falling off, rear wiper falls down at random times, heater dials arent lit, inner wheel arch trim missing, lower front grill missing, buttons missing off center console...