pd130

Hi guys, I’m having some weird electrical problem with my car, it’s a 2006 Ibiza Fr. Basically the car has been running fine (just about being a seat) but all of the sudden it will not start anymore. I went out for a drive 2 days ago was all good and working. Parked up for an hour then decided...

Hi guys! I really need some help if you can! My Ibiza Fr has a very strage behavior at idle, when started from cold all good, no smoke, no strage sounds nothing, letting her idle for 2 to 5 min and thing go out of hand. No errors related to engine malfunctions or so. 1. Idle consuption go far...

Went for a steady remap earlier on today which took my car to about 135/140 bhp by a highly respected tuner in my area and as I pulled off of the street I have it some in first and second and car went in limp mode followed by a cloud of blue smoke turned car off and waited for it to be...

Hi everyone Seat Ibiza PD130 from Cambridge SPEC Engine: - Garrett GTB2260VK turbo - Firad 120% nozzles - 3" downpipe - Hard pipe kit - Darkside braided turbo oil feed line - Ported and gas flowed head - Port matched inlet manifold - 70mm core dual pass intercooler - EGR delete - 4 bar MAP...

Hi all new to the forums so apologise if this has already been asked, changing my standard pd105 injectors to a pd130 set, but im having trouble trying to find the torque settings, if anyone could point me in the right direction it would be greatly appreciated, Thanks.

Hey guys and girls wondered if I could Have some sort of help from you lot I'm about to break my seat ibiza and im not sure of the prices of things obviously depending on the condition,, I have a gt1856vlk turbo with a seat sport fmic, 2.5 miltek down pipe the boost pipes, a triple skin head...

Hi , Im new to the seat scene and got to say im impressed by the ibiza ive recently purchased. Im currently progressing through tidying it up considering I picked it up cheap and in need of abit of work. This is how I picked it up: -bonnet looks as though its been keyed and laquer...

Have had my engine management light come on right after i changed my glow plugs , have read the codes and am getting 17055-17058 so basically intermittent electrical signal on all four glow plugs. Ive looked at my fuses behind the drivers side door panel and cant see any blown ones , same with...

on a sustained spirited run during the summer my oil temps reached 120 degrees:blink: which is a tad concerning...... IIRC the standand setup on a PD130 engine has an oil cooler at the base of the oil filter. Is there an upgrade / possible swap from another VAG car that's a bigger cooler...

Anybody did this themselves? I plan on doing it with another pair of hands at work. We have ramps, transmission stands and all the tools. Just wondering if its much of a clart on for people who have done it themselves? does the subframe have to be dropped or anything? Crossy

Whos been on the 1/4mile strip then with a stg 1 map? What times did you get?

New member to the forum here don't drive a seat but know a few of the lad's on here. Somebody take a look at this clutch and give opinions please, wanting a new clutch to cope with a lot more torque and a flywheel (debating whether to go single mass) preparation for hybrid turbo. £600 It's a...

My pd130 has done 103k now and the suspension was feeling tired to say the least, and as I've decided to keep it I thought I'd better sort the suspension. Had a bit of a mission fitting the fronts along with new wishbones, drop links & top mounts yesterday; I didnt manage to start it until...

Hey i have just had my car back from mapping after having a hybrid turbo and i am not completely sure i am any faster than the standard turbo on stage 1 remap. the rolling road has stated 215 bhp with 360 torque which seems low for a stage 2 hybrid! also when out for a spin last night with my...

OK - been doing some searching and experimenting to disable the EGR valve. First try : Just remove the vacuum line and block it. (This brings on the engine fault light) Next idea : Remove the pipe between the EGR and the exhaust manifold and blank both ports but leave the EGR...

I think i might end up answering my own question but i will ask anyway. My PD130 has done 74k and hasnt had the cambelt done, But it is serviced when it should be!, I just forgot all about it TBH. Been running the miles traveling to Ipswich and back to see my girlfriend. Over this month i am...

Been looking at quotes between PD130' and FR TDi's 130, whats the difference in insurance groups? are they both group 8, if so why are my FR quotes higher than that of the PD130, i thought that was the same engine? i can insure a pd130 for about £1100 fully comp and a FR for about £1600, thats...

Can you help me out by posting your Rolling Road graphs of standard PD130's and Stage1 PD130's please?

hey just had a custom map on my hybrid pd130 and have been told there is a boost problem and that it could be the n75 valve! can some one enlighten me on these and wat they cost and if they are easy to change etc? cheers

Hi Guys I've just put a boost gauge in the car and not too sure if i've done it correctly... from the standard BOV i've attached the T-Peice then so on ... is this the right place to fit it?? The main reason for checking is because the gauge is showing vacum but no matter how i drive the...