loose

Hi folks First time poster and long time lurker here. I was recently fitting a dash cam to my mk3 Leon and had a panel underneath the glovebox unscrewed. A little metal fitting fell out. I couldn't see where it would go back in. I've attached some pictures of it to see if anyone has any idea...

Happy Easter everyone! Been after doing this since day one of owning the car finaly going to do it today if I can :) When I got the car I noticed soon after that the plastic trim under the drivers seat own hanging off and loose, on closer inspection I can see there's a hole for a bolt but...

Yo guys. Since having this car back in july 09. The steering wheel feels lighter i think. Is there any way of removing the center bit of the steering wheel so i can see if the bolts are loose. Any info is great. Thanks all.

It appears that when my bootlid is closed and latched properly it is ever so slighty loose. Over rough surfaces it rattles around a bit. On most bootlids you can adjust them by turning some little buffer like things. Can you do this on the arosa? It has these little buffer things at either...

Hello. :) I've tried searching the forums but I've had no luck. Anyway, recently I had an electronics specialist replace the microswitch in my driver's side door which caused locking problems, no interior light, car locking itself after 20 seconds even if driver's door is open, etc...

Opened my bonnet tonight and my engine cover was completely off!?! I cant work out how to put it back on. There dont seem to be any fasteners. Any help much appreciated. Cheers

noticed a clunking occurring around in the engine bay recently upon investigation tonight the air filter is hanging freely, causing stress on the TIP (all be it the filter is quite light), but still this is a concern unfortunately the bolt holes on the MAF snapped off long ago (which used...

hi my bolts keep coming loose on my manifold, im now on my 3rd gasket, is there anything i can do to stop this happening, (only checked em a few days ago but then came loose within days) seen something on one of the threads that looks like it locks the bolts down but when i try n explain to...

hi there iam new on here does anyone else have this problem ? my downpipe bolts keep coming loose no matter how hard i tightend them :( it a miltek dp btw any help would be appriciated thanks guys .

Hi all. I was having a fiddling with the car, searching for a boost leak and I think I might have found it. I put my hand down the underside of the TIP (THS) until I could feel where it connected to the turbo, it feels like the TIP is on at an angle with one side sitting snug and the other...

Just been out cleaning my engine bay and by chance i grabbed hold of the fan mounts on the rad and the whole lot moves, rad, fans the whole assembly! :blink: I've checked the bolts at the top of the assembly and they seem tight but it feels like the bottom mounts have come away completely...

Ok I use the ashtray bit just to keep change in. Other day I went to put some coins in but they ended up slipping through Now there underneath rattling about !! :whistle: My question is, do you need to remove all the plastic housing around the ashtray area to get at it or ? The...

as above having problems with the bolt closest to the cylinder head (one on its own) it keeps coming loose plus it blowing the gaskets any ideas what could be causing this and any ideas to the slove the problem

just had a recon gearbox put in my 1.4 8v and a new clutch so far so good but the gear selector has too much play in every gear when i stick it in any gear i have about 5cm play on each side im also able to twist the gear stick cockwise and anti clock wise. im guessing is the bushes...

Ugh!! Woke up yesterday morning to find that someone had kindly tried to kick off my passenger side wing mirror (how else do you explain a footprint on the casing??) Anyways the didn't really do a good job of it so they have just unseated the wing mirror from the plastic bit that touches the...

Just noticed my cv boot that I'd cable tied on Wednesday has come loose again. I need to drive from Blackpool to Cumbria in a few mins. Will it be alright? Bloody annoying!

Hi everyone, sorry if this is in the wrong section but just after your opinion really... Last night i was driving home and heard a tapping noise coming from my front nearside wheel, i pulled over and checked for stones in the tyre etc but found nothing. I got back in the car all seemed ok...

ok, come for a trip with me, open the bonnet and look at the top of your turrets. you have the nut inside the inverse dome shapped bit with the rubber edge then bellow that there is a black circle of metal. this black circle is loose on the passenger side! is this bad? is this normal...

only seems to happen when i really boot the car, mk1 leon cupra t. when i get it up to 5000 revs (only seems to happen in 2nd and 3rd) the battery light comes on and i loose breaks and steering, obv not completely but as if its stalled, quick few taps on the accelerator and it boots back in...

Hi, Should have asked this one last year, but it did'nt affect anything. Last year i went from standard bumper to facelift type on my Mk4 ibiza. There was a wire with some sort of sensor or plug fitted on the end which was slotted into the original bumpers inside , at the front,which i...