Welcome to our new sponsor Lecatona, a brand dedicated to enhancing performance for VAG group sports cars, including SEAT, Audi, Volkswagen and Škoda. Specializing in High Pressure Fuel Pump (HPFP) upgrades.
Hi again,
Just tried to put a standard ISO SD/USB radio in my Mk5 Ibiza and found that the wiring block in the car wont fit a standard ISO radio !
I've taken pictures to show:
Does this mean i'd need an adaptor of some sort to fit onto this and terminate into ISO connectors...
don't want to bore anyone with introduction the problem so I just get straight to the point.
got parrot ck3100 with standard wiring and need reassurance how to connect it.
my questions in bold.
http://www.nexxia.co.uk/Installation_Advice/Car_Kit_Installation_SOT.htm
1. green and brown...
Could somebody get this clear in my mind once and for all?
I'm looking to replace the OEM head unit in my Leon with a single DIN Pioneer unit that I've got. I know about the facia adaptors (sat nav surround & mk4 golf adaptor) so no worries there. What I'm not sure about is the wiring harness...
Thinking of installing a Parrot bluetooth kit in my Leon. Anyone got any pics of where they have mounted the control and the screen?
Alternatively, does anyone have pictures of a brodit iphone mount in action?
Cheers :happy:
Hey guys, need help with one wire on my Mk4
I have one of these:
http://www.caraudiodirect.co.uk/active-aerial-adaptor-p-211.html
To boost the radio signal in my Mk4 Ibiza as the stock ALANA head unit has this built in, giving me bad signal on the radio when I'm using the radio. I have...
I am fitting a new Blaupunkt headunit to my MK4 Ibiza, this unit allows me to directly connect to the cars standard ISO connector with no need for a adapter or harness.
I need to swap the ignition live and the permanent live around.
The problem is getting the wires out of the iso connector...
Having spoken to both Celsus and CarAudioDirect, tracing back my purchases the products working on mine are:
1. ISO stalk interface - product no. ASC2638 (NOT CAN-Bus)
2. Radio interface (corresponding to your radio manufacturer) - in my case this was ASCPIO (Pioneer)
others have found...
Does anyone know which harness will fit an Arosa - ISO?
Part number or which Seats are the same?
They seem to list all other Seats but Arosa!:doh:
Also, my standard Seat cassette headunit isn't ignition fed.:rolleyes:
Is there a feed in the harness that isn't connected or do you need to...
Just been to halfords and bought myself an ISO connector, it plugs into the harness coming from the car no problem, it also plugs into the stereo fine and I can use the stereo. My issue is that I am running a parrot hands free off the plugs the ISO provides and I'm getting nothing.
Either...
Hi,
I have an mk2 Ibiza with an aftermarket LG headunit fitted.
The system does the usual loosing stored settings etc when the ignition is tured off and I have read that this is due to the VAG cars having their ignition and live feeds to the stereo the wrong way round.
Basically I want...
Just got this so i could connect my amp to standard head unit
http://www.autoleads.co.uk/head_unit_adaptor.html
it does fit in but u have to take out the block wich has the wires for the aircon and stuff and when u do this the aircon is stuck on:(
so just wondering if anyone has any...
Im looking to buy a Dension Ice link + so i can use the my Ipod Nano with the Alana Headunit...
Ive seen the ones that dension do which are £100 but.....
On ebay there is one for VAG cars with an 8 pin Iso connector for £75 new...
Does anyone know if the 8 pin connector is the right one...
Hi all. I'm pretty clued up in regards to ICE, although I'm trying to fit a new Alpine H/U to an 02 Leon. Pete reckons that it just plugs into the exising iso plug but it's completely different. Is there a specific ISO adapter that I need?
Probably am being totally thick but when a stereo says ISO fit does it mean it will plugs straight into the existing stereo/speaker wiring, or does it mean it will fit an ISO adapter that will go into the existing wiring. :confused: cause 2 people have given 2 different answers.
Similar to my query of a couple of days ago, but i have now found a face plate to convert from AURA size radio to standard size radio. The only remaining question is (before i take the unit out), are the connectors in the Cupra (52 reg) standard fit ISO connectors ?. I cannot find out this info...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.