injectors

could someone tell me what size LCR standard injectors are in cc? and what ones should i upgrade to?

I have a 54plate LCR(225) and wanting to uprate the fuel injectors? any recommendations? prices and where i can get them from?

Does anyone know where I can get hold of a PD130 turbo and injectors (not having much luck on ebay) also what sort of price should I be looking at? I'm hoping to get my Golf 115 up to 130 spec :think:cheers.

Got some sencond hand injectors, traveled 93,205 miles for £130 . is that an ok price, and how safe is it to use old injectors when going hybrid Edit: BAM 225bhp 386cc injectors

Hi all Well I've just been forced to re-evaluate tuning my leon. The crap allards turbo has given up the ghost (wastegate duff). So looks like I'm going to TD to get a 376. I've also just emailed to see if they can do anything bigger if not then its the 376. Anyway I'll get to the...

I wasn't really sure of the best place to post this but can anyone confirm that the injectors in the picture below are actually BAM injectors? They were supplied as 06A 906 031 BC (apparently off a LCR) but there isnt any part number on them. I thought they would atleast have Bosch stamped on...

Hi all, I'm hearing different stories about the LC Injectors. Some say we do have the S3 injectors and some say we don't.:confused: Plenty guys who upgraded to the K04 Turbo on their Gti's, also install the S3 Injectors. Do we have the same injectors as the Gti or the 8P S3?

Hello all how do you change the O rings an seals on the injectors on a LCR? The rings dont look like they come off easy? got a slight leak of air on 1 injector so wanna change them all :confused:

Just wondered if anyone knows what duty cycle the injectors on chipped LCRs usually run at, and what psi do most people upgrade them?

its probably been asked before but ...... see the way the 130/150 and 160 injectors are the same! im at the point where i may need bigger injectors! what do i get to replace them, so is there nozzle attachments for them ! ive been on the TDI club fourmn a few times but cant find...

hi im just wondering would there be any performance deifference if i was or anyone else to get the cuprs tdi injectors fitted to me 130tdi, it has been remmaped so would they increase the bhp???? has anyone done his????

I've found some LCR injectors for sale, but for the earlier 210 BHP AMK engine, as opposed to the 225 BAM Looking at the spreadsheet provided in http://www.seatcupra.net/forums/showthread.php?p=2127888 these are listed as 386CC the same as the BAM ones, but have a different part number and...

Any idea how long it takes for new fuel to make it through to the engine on a Mk IV ibiza 130? Mine cutout this morning with what seems like no fuel - starter turns but no effort to fire, just wondering if fuel contamination is a possibility after filling up (defo with diesel!) last night (done...

spoke to a friend today who recommended to me to upgrade my fuel injectors. my mods are, fmic, cold air induction kit, stage2 custom map, ths performance de-cat, supersprint cat back, ths exhaust manifold. would it be worth me upgrading my injectors if so which ones and where do i go to get...

Right Ive got all my bits fitted on the cupra nealy But left to do is A: Fitting Injectors is this easy and does anyone have a guide or pics of how todo it... B: I have a idea how to fit my turbosmart mbc but when it comes to tuning it do i slightly adjust it so on my boost gauge on...

All four of my cupra's injectors are leaking. You can tell this by the fact petrol is all over the surrounding areas on my inlet. I have bought new o-rings for the injectors and also new seals. After searching the forum I also found that it would be best to remove the inlet to carry out this...

Hi i am running a agu 20v t on emerald ecu.Have just replaced engine loom with 1 from emerald as i thought that was problem with car but turns out it is not :( Basically engine starts fine but is running really rich & when revving it sometimes backfires,It also seems like it is running on 3...

Ordered these 750cc injectors wrongly (bosch fitment) can anyone/bill confirm they will fit a 1.8t or 2.0t to see if it's worth posting a ad in the for sale section. bosch fitment(left) evo (right) info on injector http://www.rceng.com/Peak-Hold-Injector-PL4-0750-Bosch-style-top-P10C5.aspx

I have had one of those common problems with the 1.2 mk4's yesterday..i.e the VERY rough idle, wanting to stall, loss of power until you floor etc etc... i havent VAGcommed it yet as i have a date with AmD on the 13th. my EML has been on for over a week. Now to throw a spanner in the...

just a quickie anyone know how to get the injectors out of the fuel rail and what is the best way of changing them with the least amount of fuel spillage cheers!!