Genuine SEAT Parts and Accessories.

  • Guest would you be interested in CUPRA or SEAT valve caps? let us know in the poll

  • Welcome to our new sponsor Lecatona, a brand dedicated to enhancing performance for VAG group sports cars, including SEAT, Audi, Volkswagen and Škoda. Specializing in High Pressure Fuel Pump (HPFP) upgrades.

injector

  1. SEAT Ibiza 2 (6K1, 1.4 i phase 3)- Engine knock, Injector circuit low on all cylinders.

    Hi, I have recently an issue on my Ibiza 2. Engine doesn't start. At first OBD Scanner was giving me a TPS issue (P0322) , after cleaning it everything went back to normal. After 4 weeks (without driving it, nor fueling it back it was already full tank) I got back to what seemed to be the same...
  2. BAMBTN

    Starting issues on LCR, usual culprits checked / replaced.

    Hi guys Been without my car for near on a month now, parked her up as usual one night and next morning she just wouldn’t fire Couldn’t hear the pump priming so figured it was relay / pump issues had similar isssue a while ago and turned out to be the key in the battery & fuel relay. Since she...
    • BAMBTN
    • Thread
    • car does not start car won't start cranks but no start fault injector lcr mk1 cupra r starting issues
    • Replies: 6
    • Forum: Leon Mk1 (2000-2006)

  3. Serious issues with my Leon

    Hi I’m new and after some advice please, So I have a 2008 leon fr 2.0 tdi 170bhp, 125k on the clock and about 3 months ago it started using a lot of oil (1liter every 300 miles) so stopped driving it immediately, it is very sluggish on start up and runs really lumpy now also. It’s pumping out...

  4. Injector seat sealant

    having a mooch under my bonnet at the weekend, whilst running boost gauge hosing, and looks like i've got leaks from the injector seats. I'll be replacing the seats and O-rings, but Elsawin mentions a sealant and also gives the part number. I havent enquired about price yet, but I don't want...
  5. cupra-gaz

    removing injector seats?

    hey all, does anyone know how to remove the 4 rubber injector seats? from the inlet manifold? thanks

  6. injector wiring loom/ wire harness/tdi misfire

    Hi folks I need some help , got big jobs coming up on my tdi sport cam belt/ service suspension etc so big bucks !!!!!! However iv got a slight problem when the car is idling when fully warm? It judders and shakes the car , I know lots of people have similar symptoms . Its not the maf as I...

  7. Pd tdi injector cleaner? please help

    Just some help my 130 tdi Ibiza only sometimes is a bit lumpy when warmed up , the problem seems to go when I pit In high quality diesel? I thought it was due to my idle needed to be changed however this cannot be changed manually. My mechanic said it could be a clogged up injector . I have...
  8. wisejason

    Think I might have leaky injector seals?

    Can someone please tell me if this is the case or normal. I've attached a photo of the worst one (cylinder 3), but the others are very minor compared to this one.
  9. KennyPOLO_Gti

    Injector Type in BJX 1.8T

    Had a look in the search etc but cant find what injector type is in the BJX engine? I have been offered a set of new TT injectors from a BAM engine, part no' 06A906031BC. Type EV6 Would these fit the BJX?
  10. adam cupra 20vt

    Injector seats

    How do you get injector seats into the inlet manifold? They look as tho they screw in but I have no idea what to do them up with? :confused::confused:

  11. Injector help please peeps

    17669 - Pump-Jet Valve: Cylinder 1 (N240): Regulation Range Exceeded Got the above code coming up and under a light throttle it feels like its not firing right, i am guessing there is a problem with the injector? But i have looked around and prices for a new one range from like 100-750...

  12. Idle RPM issue. (open circuit for injector)

    Hello. I own a 1.6 16v Leon 1M 2002 BCB engine. After i disassembled the engine because it had 2 axial bearings damaged, i repaired the crankshaft because it was affected by the bearings, and i unjammed the pegs (i don't know if this is the term but the french is taquet) because some of...
    • bedazzledhouse
    • Thread
    • circuit idle injector issue open rpm
    • Replies: 4
    • Forum: Leon Mk1 (2000-2006)
  13. john_tdi

    another race injector question

    ok folks, i've got my race injectors sorted. question is, can they be fitted for a week or so before a new remap? Or is that going to damage something? ta
  14. lm_gauci

    Inlet manifold injector seat

    Right, im polishing my inlet manifold and was just wondering if the black seat things in the manifold can be removed....? The pic i stole from wilz might explain better, lol.
  15. dainott2105

    Injector cleaner. Any good?

    Hi folks is it worth me buying the injector cleaner that you add to a full tank. 1. Is it as good as they claim? 2. Could it damage my petrol cupra? Cheers Dai

  16. Injector cleaners and testers

    I have a Cupra TDI 150 and need to get the injectors cleaned and tested. Where abouts would be the best place to get them checked? I live near Stansted Airport. I took my car to a Bosch specialists and they didn't have the testing equipment there and would need to send them away. I'd...

  17. Part numbers for LCR injector seals an O rings

    does anyone have the part numbers for the rubber rings on the injectors an the plastic rings at the bottom
    • B3LSY
    • Thread
    • injector numbers part rings seals seat leon cupra r
    • Replies: 8
    • Forum: Leon Mk1 (2000-2006)
  18. PhilW

    100%+ Injector Duty

    Now i remember bill talking about this, and just popping onto Vortex i noticed this thread.... http://forums.vwvortex.com/zerothread?id=4227807 Now if i had a wideband installed i'd probably run some 380cc's and see where i could get to with lemmiwinks. Any thoughts?

  19. LCR Inlet Manifold injector seats.

    On the LCR inlet manifold were the injectors go threw the Mani there is 4 supporting bits of plastic to hold them in place does anyone know if they come out as I'm having it powdercoated any they will melt in the oven
    • B3LSY
    • Thread
    • injector inlet manifold problem seat leon cupra r seats
    • Replies: 14
    • Forum: Leon Mk1 (2000-2006)

  20. Injector Cleaner

    Was in the dealers today and considered an Injector clean, they use a product called Forte been looking on the net and cam across BG 44K® which although is more expensive seems to have a good following in the US according to the blurb. Also seems that the VW audi group is using it...
Top Bottom