hvac

Hi, I retrofitted an RLHS sensor to my car about 2 months ago, and it was an overall success, except for the fact that the HVAC system always detects high humidity on the windshield. The sensor was in pretty good condition, except for the fact that the small ribbon cable at the bottom was...

Hi all, will try to explain situation at short, all vents work fine with cold and hot air , expecialy thos on foots front and rear side, scanned with VCDS and shows only one error : 328965 - Motor for Front Air Distribution Flap B1091 54 [009] - Missing Calibration / Basic...

Having a heating problem with my Leon, I've seen threads on this before but nothing as specific as mine. 2 days ago I had a low coolant warning on the dash, checking it revealed the coolant tank was almost empty. It was last checked a few weeks ago, so is very odd to drop so much so suddenly. I...

The purpose of this manual is to show you how you can remove the central console and then remove the switches out of the unit to enable work to be carried out. I will update over time to show how i fitted a stop start memory module (I need to run a 12v power feed to the back so on hold for a...

Hi, Wondering if anyone could give me some advice or tips to try before i take my car to the garage. I am getting next to no heat from my heaters in my car where do i start? I have a plugin ODBII i can use via an APP i can try later, is there anything else i can look at/try? Cheers, Mooney.

Hi guys My leon has an heating problem, please can someone help? The blowers only get luke warm all throughout the temperature range (even on 29 degrees), no matter what power I have the blowers on, and this is still the case after I've been driving for over an hour. There's also an...

As also posted in the MK3 section... Just removed some incorrect flow codes with VAG COM (SAI and EVAP removed) and also noticed I had the following: Address 08: Auto HVAC Controller: 6K0 959 291 Component: AUTOCLIMA-220 X06.00 1 Fault Found: 65535 - Internal Control Module Memory...

Just removed some incorrect flow codes with VAG COM (SAI and EVAP removed) and also noticed I had the following: Address 08: Auto HVAC Controller: 6K0 959 291 Component: AUTOCLIMA-220 X06.00 1 Fault Found: 65535 - Internal Control Module Memory Error 04-00 -...

Have just run auto scan on vag-com,all is fine except for this part,it scans for ages then says - Address 08: Auto HVAC Controller: 1M0 820 043 E Coding: 00041 Shop #: WSC 06402 Note: Excessive Comm Errors Is this a fault with the ebay lead,or the car?