hubs

Hi all just woundering weather anyone nows which hubs need to be used for fiting a set of d90s as i want to get some for my cupra that i have only just bought. any help would be apretiated thanks. lee:funk:

The bearing has gone in the OSF hub of my wife's 1999 Seat Toledo 1.8 20v. Rather than getting a new bearing for £25 and going to the hassle of getting it pressed in by some local garage, I thought I'd see if I could find a breaker and grab the hub off it and swap that out. The only breakers I...

Hi there. My FR is about 5 months old now and all 4 hubs have begun rusting quite badly. I contacted my seat dealer and they asked me to take it in to be looked at. It was in yesterday and to my disappointment they told me that it was surface rust and, the nature of the materials used...

hey people ok then, my mate's just brought a mk2 gti valver he doesn't know much about cars, and didn't take me along, and i went around to look at it, and it's definitely been in a crash (arch is bent/not sitting right) and more worryingly i thought a bolt was missing from the wheel, so...

Hi there Just wondering, will the front hubs from a mk4 golf gti turbo fit a mk1 leon? Im pretty sure they do, just want to check :) Cheers

There are rumours around real output power pushed by CUPRA´s engine. Manufacturer states engine power, but it is power "at wheels" what moves with car. We have to consider losses in transmission and etc. So when the measuring at the wheel hubs shows the same results as manufacter states, it...

been discussed before prob , but what is the best thing to cover the rust on wheel hub tried hammerite but the heat of the front brakes seems to making it come off ,now it looks eithan worse than before some kind of heat paint perhaps?:(

Wondering if anyone clever with the etka program or whos a bit clued up could help me find out the following: Im after some wheel hubs to replace the smaller ones on the seat ibiza, to fit the 312mm brakes to however the silly prices at seat mean that I will be looking to source them else...

Hi all I am putting bigger brakes on my car soon as i have 281mm standard and the carrier is joined to the hub, so ive got to change the hubs to one which have a removable carrier and caliper. I already have hubs, carriers and calipers from a cupra 20vt. The question is this, how long will it...

ive have some Audi A8 rims to fit onto my cupra but they are 5x112, obviously im struggling to fit them, before i start modding the hubs are there any other hubs that fit asin... S3, R32, Leon in the 5x112? thanx and regards dean

does the above work? i just know that i can buy rear hubs off a mark 2 for cheaper then a mk3.. cheers

Am looking at trying to fit the 8J rear teledialas on my Ibiza, but am unsure of how I will do this. When I trial fitted them with 20mm adapters I ended up with an offset of et3 (et23 wheel +20mm adapter). Here are the pictures Ways I am thinking of getting them fitted is 1 Camber...

does anyone know if i can swap the front hubs from a mark two leon on to a mk1 leon, i'm trying to change the stud pattern of mu mk1 to 112 without using pcd adapters. i know there mightbe complication with brakes etc but where there is a will there is a way, just wondering has anyone already...

my rear hubs are nackered on my car, due to crossthreading.my fault. are the hub and the disc one thing or do they come seperatly...

After getting some new hubs so I can get bigger 312 brakes for the pd100. So was wondering would a 1.8 FR have the same hubs as the pd130, just baisicly what models have em so that I can ring round some brakers and source some.

Anybody elses wheel hubs going rusty and horrible like mine:- This is the N/S front and the other 3 are just the same...! I was going to sand them down and paint/spray them BUT then i thought maybe i could get it sorted under warranty?? Just to add the car is a 3 month old FR TDi with 18s ;)

Is there a post about this? I've seen them in the past, but couldn't see a recent one. My hubs have gone rusty, so too have my Hubby's cousin's on his FR TDi (Mine is 6 months older than his). I'm going to start emailing pics to Seat this week (when it stops peeing it down with rain)...

Anyone notice any discolouration on the hubs(?) just behind the alloys? Top Gear's fleet GTi suffered from the same problem I think. A little annoying when you've got shiney 18"'s.

Hi folks, New to the forum, but been viewing for a while since taking delivery of my FR TDI. More than impressed so far having traded in Mk1 Cupra TDI for an ex-demo. Only slight gripe is the hubs (?!) are quite visible on the 17's and are showing signs of rust! Anyone else noticed...

Has anyone ever fitted or seen vr6 hubs fitted to a mk2 cupra? obviously the cupra is 4 stud, but i am thinking of converting it to 5 stud so i can fit some bling merc rims. just wondering if anyone has seen or done this?