g60

Hi all I’m replacing the gearbox on my 20vt Ibiza Cupra. I was going to replace be clutch with OEM but I’ve seen a few people recommending to fit the G60 flywheel and clutch whilst the gearbox is off. Could someone explain the benefits of this and if it would be worth doing or not. Could someone...

Hi. I installed a spec 3+ clutch and G60 fly a while back ago. Now I`ll be trying to find TDC in a short while(top dead center) Will I still find a mark on the new G60 fly? Prebs

I'm thinking of getting some 15" G60 steel wheels for the arosa and was wondering what to do about tyre pressures? I just want more of a footprint on the road and I like the look of these wheels. As far as tyres go, I'm not after super low profile or stupidly wide, perhaps some 185/55/15s...

I was just wondering why people do this conversion, also do the go straight on or is there other work involved cheers

I am planning on replcaing my clutch at the weekend with a G60/VR6 Setup. I have bought a LUK Clutch and am awaiting a G60 Corrado clutch which is being sent to me by a guy breaking his engine. I have just rang a local engineering place and enquired about getting the Flywheel lightened and...

Alright then, I sold the Cordoba Cupra a few weeks back leaving me with the Golf 1 daily. However I was missing the power of the Cupra so needed to find a replacement. I had set my mind on a Jetta because of space reasons, and wanted it with a G60. After quite a bit of searching I...

Just wondering if your clutch is noisy when the engine is idling? (and goes away after about 5 minutes of driving) Mines been on for about 3 days now and iv done about 300 miles, first noticed it the first day I had it, sounded like the release bearing was shot, but its gradually become...

hi, has anyone got a standard vr6 clutch and g60 flywheel while running hybrid turbo approx 280BHP and if so is this setup good enough for this power?

Just wondering, am I the first person to put G60 steels on a mk3? Some pics for you guys :)

hi people my clutch is starting to smell now everytime it gets warm, and is not pulling as hard as it did! so think my clutch will be on its way out soon!! so am looking at new clutchs, and was wanting to upgrade as will hopefully be making the car hybrid at the end of the year! i have been...

Had a thread a while ago but its long gone, heres a few pics of my Golf Gti turning into a, G60. Last pics were taken last monday so they are as it is now. All done my self so its taken some time, only really get the odd sunday to do bits, and a few parts have been...

cheers Rob

i have a part number for what i think is the correct one for the g60 fly and vr6 clutch conversion. just wanted to double check. the part number i have is 028105269B and thts for a genuine vag abf 2.0 16v or what i think is the G60. its also listed as 228mm which i know is the right size. has...

as above what does everyone think of them.as can get a new set very cheap.:D comments?

just wondering if its possible to fit a G60 lump in to mk2 ibiza and how hard would it be to drop it in

Hi People, I recently spotted a Cordoba on G60 steel wheels and it looked pretty awesome so I'm tempted to get me a set. Has anyone got a pic of a Mk2 on them so I can have a look? Also some Golf Mk3s (especially the estates) and Polos have some similar looking wheels (which might be...

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&ih=008&sspagename=STRK%3AMEWN%3AIT&viewitem=&item=180112514876&rd=1&rd=1 My friend has just bought this horrendously ugly beast but check out the engine - super charged! He is going to replace it with a turbo as he has the cooling and...

Have done a search and not really found my answers. I suspect that my release bearing is just starting to seize up so am going to be removing the gearbox soon when it gets worse. At the same time i'm going to replace the Flywheel for a G60 flywheel and the clutch for a vr6 item as i think...

Went to Jabba yesterday for a g60 clutch and lightened balanced flywheel. A top job was done and the clutch is a dream to use works better than the factory dual mass etc. I would reccomend the clutch setup and Jabba. Heres one very happy customer.

alright people i have tried searching but cant find any prices. i was wondering how much clutch and fly wheels are or the VR6 set up or if anyone is running this set up where did they get it from?? any info would be most greatful.. thank you pete