fpr

Hi all just a quick question my mate has just given me a 4 bar FPR for nothing.Was just wondering whether there is any point changing the one on my LCR.Ive just fitted a forge FMIC and a decat pipe, would i notice any benefits replacing the FPR.:shrug: Thanks in advance.

Does anybody know the part number for a 4bar FPR that i can get from SEAT? which will go straight inplace of my standard one. Thanks

Hi guys, planning to go Stage 2 Revo soon, i've just bought a 4Bar FPR, was just wondering if it would so any harm fitting it now before Stage 2 map? Will be about 2 months before map i think as i need to get a turbo back exhaust too! Mike

I have booked my car in for a custom remap at jabbasport, but am wandering is it worthwhile getting a 4 bar fuel pressure regulator, would it make a big difference?

hello everyone Been in the garage tonight and well my n249 didnt look like yours so i thought mine will lol I hope ive done it right in pic 1 and one final question the Fpr pipe was that ok to replace with 4mm silicone hose because the oem was chopped by previous owner so i thought i would...

Hey, iv got a 4 bar FPR fitted to my Ibiza cupra, But theres a power boost valve fitted in line before it and i see no reason for it? Iv searched and searched and cant find anyone else on the forum with one. When i come to remove it the car wont run. Is it because my standard cupra pump isnt...

Hey folks, always wondered why my car pops a fair amount, whilst it sounds great, I do wonder if it's overfuelling! I thought i'd check my FPR today to see what the code was on the sticker, this is what it says; TOP PART 06A 133 681 Underneath it says; P630S 1000 492 Is that a...

Hey anyone know what the best 4bar fpr is and were can i get one? (planing a revo stage two) i have tryed searching but cant find what im looking for, cheers

In the Bristol area preferably or mail order if not. GSF don't keep them in stock so will need to order in, really need it for tomorrow. Thanks

Researching on here in to fitting a boost gauge all seems good lots of info. But i keep reading where to put the T piece into and FPR is mentioned allot. What does it stand for?? coz i hear its better to put the T piece here rather than off the DV. Sorry if this sounds a silly question and...

I have been searching around on here for a while now but cant find what I am after. I am currently preparing my cupra for a revo stage 2 map. I was wondering if there is a 4 bar fpr available for the cupra that is a direct replacement for the standard regulator? Or do you have to go down the...

i have a 210 LCR remapped by *********, havnt had a brill experience with them but was ok and they put it on the rollers made 258bhp. after a 007P, and high flow k and n filter. never had a problem with the map and seems to run fine. i have a 4 bar fuel pressure regulator on at the moment. just...

anyone no were i can get a 4 bar today or tomoz or if anyone sellin one local

hi all, does anyone know a part number for a vw/audi 4 Bar pressure regulator to fir the 1.8vt (AUQ) lump??

Just abit confussed on this on now allways thought it was a 4bar FPR for stage to but apparently you can use standard 3bar FPR now according to a revo dealer i went to and also rang revo and they said same so whats eveyr one else running you on a 4 bar or a 3 bar? Back on a 3 bar now as they...

ive noticed a lot of you have uprated fuel pressure regulators just a few questions. Ive done a search and couldnt find anything on the subject Where do you get them and how much? How do they fit on? Are they hard to fit? Do they make a difference?

On the standard 3bar fpr the hose is clamped on with one of those small metal clips, when I fitted the 4bar I have used a cable tie to secure the hose, however its not all that tight - it could be pulled off with a little bit of effort. How likely is it to pop off? Do I need to get some sort...

What will an FPR do to my car... im thinking about getting a 4bar one as im gonig stage 2 custom code soon.....as thats really next to do on the list.... Do i buy a VAG one or someone elses? Cheers Rich

Ok im a bit confused :confused: I thought all cupra r had 3 bar fpr but i have been told that the later cupra r have 4 bar fpr. Is this true?

I know this has been covered hundreds of times but is there any chance any of you guys and gals would have the BOSCH part number for the fpr? can't seem to find the info anywhere!! got the audi p/n but i've been offered one off another car and need to check the p/n before i say y or n. cheers...