driveshaft

Hi Folks Does anyone have/could get info on the front hub nut tightening sequence & torque settings for an Ibiza 2016 1.2 TSi (6P5 CJZC). I am about to replace wheel bearing hub. I have been searching various forums & workshop manuals, all with conflicting/confusing results. Thanks in advanced...

Hello all, Doing a wheel bearing change and have been supplied with a different axle bolt than normal. This one comes with a hex head and a washed instead of the standard twin hex head. The normal torque setting is 200nm + 180, however I’m unsure as to what it will be on this. Any help would be...

am looking for the size of the nut at the hub end of the driveshaft? am changing my springs and have to take the hub and shock out as one unit cause i couldnt get the shock out on its own!

Just been onto a seat dealer about getting the clutch changed, they say it is an extra £60 because the driveshaft bolts are stretch bolts, haven't heard of this one before!

Hello, I have a mk4 ibiza, and in the middle of changing the drivashaft but have stumbled across a problem. Does anybody know what bolt is holding the driveshaft on, on the outside. Its like a funny sprocket shape about 34-35mm and is a bluey green colour. Anybody know where i can get one of...

Ive had some sportlines put on last week and the garage broke my driveshaft (end part?) well they have now fixed it and are waffling on about how leons(2.0 TDi DSG) are not ment to be lowered (mugs). anyway, they said because of the lower springs the driveshaft would sit different and could...

hi was wondering if there is a certian way or removing drivers driveshaft as im changing my turbo an also got a leak coming from drivers driveshaft so going to also change the seal, is there any certian way of removing or will it just pop out once i split the hub? this is leak i have not to...

Hi all, just in the process of changing the front wheel bearing on my Mk2 16v Ibiza Cupra, I've just ordered a haynes manual but not recieved it yet... Does anyone know the correct torque figure for doing up the 30mm nut on the end of the driveshaft through the hub? Many thanks.

Evening all Was out tonight and driving home i started getting a knocking noise and could feel it through the floor aswell, like a thud. It goes with the rythym of the speed, the quicker i go, the quicker it knocks/thud. If i push the clutch in and coast, the noise dissapears. I started getting...

Rite then im in need of a nearside driveshaft for my 2.0 16v mk2 which as we all know is the same abf engine they use in the mk3 golf. So am i right in saying that a mk3 golf driveshaft off a 2.0 16v will be a straight fit?

Hi all, i have done plenty of reading thanks to all your threads and posts on this topic. Now obviously my drivers side arb is rubbing against the driveshaft due to me being on coilovers. My question is, has anybody here got longer drop links like the FK ones instead of uprating the front...

Hey there :) on friday after finishing work, cars been running fine until about 5 ish on friday when i just nipped out.... was waiting to go right at a junction, pulled off and CLUNK!!!!! a noisy loud clunk/ vibrate from underneath my seat/ handbrake area. so straight away i pulled over...

after i lowered my car my driveshaft looks like this haven`t hade 4 wheel aligment yet so i hopei will look better after that the left drive shaft this how low the car is

Does anyone know the correct size socket for the driveshaft on my ibiza. Ta

Hi again every1...Gotta bit of a divvy question. I've done seach on cv joint removal on my leon there was an intesting guide put on here by GJB. on his thread he said it easier to work on the shaft of it taken off the car so my question is " if i take the driveshaft pff the gearbox will i lose...

ok, they're not allen or torx, they are finer than torx, any ideas? i need to take the drive shaft out to undo the last bolt on my sump.

whats involved in removing and fitting a new driveshaft? also where can i get 1?

Hi all i need a new/used N/S driveshaft for my ibiza mk2, theirs 1 on ebay for a mk2 1.9 tdi for £40.00 does anyone no if this will be the same as my mk2 2.0 16v gti 1997??? Cheers

hello ther just woundering if any body could help me were could i get a reasonable priced driverside drive shaft for my mk3 ibiza cupra or is ther any other shaft what will fit like ( golf mk4 20vt or ibiza cupra mk2 gti cheers and help will be much appriciated thanks dan

hi all, just recently after having my car mapped was coming home last night and just left a set of traffic lights when i heard a bang and no traction, i immediatley stopped to car in a bus top and looked for damage, obviously checking both driveshafts connections at the wheels, both where...