dogbone

Hi guys and gals, Just another quick guide for anyone who's been thinking of fitting a polyurethane bush insert to the lower engine mount, also known as the dogbone mount. This mod is quick and easy to do, with minimal tools and skill needed. In total it took me around 15 minutes. What you will...

Please can someone clear this up for me, just got back from a week in Devon and my Powerflex dogbone arrangement was waiting in a package from AMD. I opened it up and it says BMW-Mini on the bushes packaging? Have I received the right one for my LCR? Here's 2 pics [/IMG] [/IMG]...

anyone no where i can get a uprated dogbone mount.

Hi, i have decided to uprate the dogbone mount on my lcr. Have been reading about it and some people have just replaced the bushes for polybushes saying that this gives the same gains. Is it necesary to uprate the whole mount, or can i just uprate the bushes for the gains i am after? Also where...

I have ordered Powerflex dogbone insert because I have too much engine/transmission movement since Stage 2, but I am not sure do I need to replace also the lower engine mount purple bush part no. PFF85-505 , or just the yellow insert PFF85-504? Are there more vibrations and noise with both parts...

dogbone mount will it help on std LCR210 Hi guys just a question, my car is practically standard, though typically when you try taking off pretty fast theres a fair bit of wheel hopping, if i upgraded the dogbone mount will this help traction??? also what else can i do to imrpove traction...

Hi guys, Just got my INA track density dogbone mount through and just need to order the correct bolts now. I believe i need stretch bolts? Just spoke to Seat and need to check exactly which ones i need... there seems to be 5 holes on my bracket, see the attached picture: 1: Right...

Alrighty! Last week I had all four front suspension bushes on my LCR replaced with the Powerflex PVC bushes after a recent service advised that the originals were close to ruin. I also had the front engine dogbone mount replaced with the Powerflex part. When the original dogbone mount was...

just fitted my dogbone mount that i got from forge, iv heard that loads of people say that it vibrates, iv done all the bolts up to the correct torque and theres absolutely no vibration, is this normal?

Now the car shakes alot when i try and creep forward on the clutch! is this normal? moment i whack some throttle in it goes away. im 98% sure this is fine just checking tbh.

Hi guys, hoping someone can help?!?! Got a 2003/03 1.9Tdi Sport (130)(chipped to 170bhp) and am getting alot of movement (back to front) from the engine in the bay (so bad it has started pulling the intercooler pipe off on a regular basis! even when driving ‘sensibly’) Seen a couple of...

It was suggested to me last week that an uprated dogbone mount could help get more power down and reduce wheelspin/wheelhop somewhat. Doing a search, there is so much info here but it all got a bit confusing going from thread to thread so I thought I'd ask again (sorry). :headhurt: I've...

can any ne tell me what this wish bone thing is ur all doin. is it a bush somewhere??? Am lokin to get a stage two remap and u all say u have changed this wishdone

just had my polyflex dogbone fitted, and boy does the car vibrate. That normal? will it calm down?

Is this the Resonator on the exhaust on the Cupra, that U can remove to retain some more sound of the engine? For fun: Cupra turbo :funk: Cupra Dogbone bushing

No joy with a search so does anyone know the whereabouts of a guide...? Just need to know basically if the engine weight needs supporting when its removed...

Dont know if you ibiza PD130/160 boys have seen this yet, but the lovely people at Jabbasport have developed this: Its a uprated dogbone mount.. originally for the Fabia vRS, but will fit the TDI Ibizas too.. the standard part can wear and add a little bit too much driveline "shunt" - ive...

is this the right dogbone that most people use, or is there a different one? http://www.forgemotorsport.co.uk/content.asp?inc=product&cat=1305&product=FMPFF85-420

Right after my bottom undertray fell down today on the motorway and looking at i now need to replace [:@] That ain't cheep either, left side right side and main bottom comes to £189.00 from Seat. So pick up parts tomorrow, good thing my Dog Bone arrived from the good old boys at Powerflex...

£15 from Awesome + massively reduced wheel 'hop' when the fronts break traction - Bit more noise and vibration when pulling away at low speeds but barely noticeable. Has the bizarre effect of making the exhaust seem louder. Didn't notice any change in throttle response or anything like...