cylinder

hi guys i need your wisdom....02 cupra r 210 ( amk ) coming home from work few weeks ago and car runs rough and judders eml came on so crawled home keeping revs down.. gets car on drive and notice smoke coming from under bonnet just thin smoke if that makes sense.. well i run vagcom and came...

I've got my old cylinder head back after engine blow up and its seems untouched, its a BAM head. Question is it worth anything? Its only done 15k miles. Or should I keep it and when funds allow have it flowed/ported etc and put on car? :confused:

Hi everyone, I've just registered for this site and I'm hoping you guys may be able to help me. I have a leon Cupra TDi (04 reg) and hav a fault code of p0672 (Glow Plug/Heater Cylinder 2). I've changed the glow plugs but the light comes on each time I reset it. Any ideas of what it might be...

Hi there 've got a mk2 golf and i'm in the process of fitting a 20vt engine. im hoping that someone on hear can help me with a part im trying to find from a seat ibiza cupra mk3 (this is what i'm told it comes from) Like the title says it's the stubby 22m brake master cylinder. I've tried...

Does anyone know if a APX head from a tt/s3 will fit a AUM (golf) or AQX (ibiza) 1.8t block? Thanks Tim

Having recently changed my master cylinder and subsequently having to replace the primary brake pipe to the ABS modulator, then bleeding all brakes until there is no air at all coming out using both an Eezibleed kit and the conventional 2 person method - I took the car for a drive at all speeds...

Hello peeps. Whats the piston size on the master cylinder on the 1.8T Cupra? 22mm? Cheers Ross

My clutch master cyclinder has just gone for the third time. Seat are going to replace under warranty again, but i am getting sick of this as they have to treat it as a break down to get the car in straight away and i am without it for at least 3 days. also Seat are saying that although they...

where do i get the correct tool to for my cylinder head bolts? ive tryed the dealers and they said they arnt allowed to sell me one :( HoocH

Anyone know exactly which brake master cylinder is suitable for my car (T Reg, April 1999, 2.0L 16V GTI Cupra Sport)? I've been searching for one online and none are showing for the 2.0L 16V ABF engine. All other engine sizes available :confused: So, anyone out there who's bought and fitted a...

thought i would put a guide up on how to change a clutch master cylinder as apparantly it is a common fault! firstly i would only recommend that a mechanically known person does this as it is a trickey job! to diagnose if your clutch master cylinder has gone mine had a sticking clutch pedal...

Out of interest, can you bolt a AEA polo 1.6 8v head onto an AEX 1.4 8v ibiza block? I know on the vauxhall side you can put an X16XE (1.6 16v) head onto the X14XE (1.4 16v) block and see good gains.

Well what i expect to be 30-45mins job, has gone totaly wrong. trying to fit in the new pedal, but oculdnt manage to fit in the spring, so ive decided to remove the whole pedal case. didnt relise there was pipe behind which was so f*king short. The 2nd bracked on the back of cylinder broke and...

Hi folks, As the subject line says, the blanking plug in the base of the EGR keeps blowing out !!! We have replaced it twice and it's gone again. Perhaps we just haven't been able to fix it tight enough but we don't know too much about these things. First off - why would it blow out in...

Hi, does anybody know if you can use the original fluid reservoir off a 1.4 on a 22mm Master cylinder when upgrading, or do you have to use a 16v golf one? Cheers, Jon

Anyone changed the clutch master cylinder on the LCR? I’ve done a search but can’t find a guide or info on changing it, any help or pointers would be appreciated.

hi guys think my clutch cylinder has gone just want to make sure you think the same its leaking break fluid all the time so have to top it up looking under the bonet and its all over the top of the gear box, also the cluch some time stick down on the floor and have to pull it back up? is the...

Guys just turned the car on bout an hour ago and it was spluttering it tits off, got the vag com out and this code appeared i though that was the case, is this quite common? and what do people normally do about rectifying this problem? cheers :)

i have very good reason to belive that mine is very much on the way out taking it to the dealership tomorrow but wanting an idea of time and costs etc. car is still in warentee till 29th december. cheers also, any one know of a cause would be swell.

ive been doing some logging over the last ferw days to check my cf's, as i think i could increase the timing further. been seeing a row of 3's then dropping to 2.3 then 0.8, today cylinder 1 and 3 had no cf's at all, cylinder two looks like usual with the odd 3 then dropping to 2.3 then 0.8 but...