clocks

I have a 1996 MK2 Ibiza, and currently has a clock instead of a rev counter. So was woundering what would be the best replacement and how easy would it be to connect the rev counter up? Thanks Jordan

Hallooooo was wanting white clocks for my ibiza but where the rev counter is on the white clocks, I HAVE A CLOCK? Is there now way i can put the white clocks in and wire it up so i have a rev counter? cheers.

hey up, im after the chrome dials for the clocks on the dash and the chrome sills also. can you get them from this country or ebay at all?

quick question i've got a 1996 Gti, the clocks go from 0-140mph and i want to change the lighting so: will these http://cgi.ebay.co.uk/Seat-Ibiza-1999-2002-1-4l-Dash-Clocks_W0QQitemZ290133157236QQihZ019QQcategoryZ100918QQrdZ1QQssPageNameZWD1VQQcmdZViewItem#ebayphotohosting fit my dash...

Hey, Anyone removed there clock (& maybe changed the 'bulbs')? Any info' on how to remove them? Cheers

Got myself some Cupra R speedo clocks from ebay, they are brand new and have never been installed in a car. Took my old ones out and plugged them in, expecting to be faffing around with vagtach to try to get them to work..... The car starts and drives as normal with the new clocks in, only...

I am a bit confused here, i have seen other toledos with a little red L.E.D display on the clocks, its about 10mm wide and about 80mm long, this is situated below the square box that has the warning lights on it. Would this be for the SAT NAV at all or temperature display maybe? secondly is...

my clocks on my ibiza cupra 51 plate have given up so ive got a new set and need to know what i need to install the new clocks any help would be great because i dont wanna take it to the dealers

today i went out and had my road angel in and have found that my clocks over read by 5mph this explains why i have been getting times to 60 in 7 secs as i am only doing 55 in second gear .is this a common problem with these cars or is it just mine .

Hi guys, i recently installed a Bosh HID conversion kit to my GTI. I had a set on my 1.4 and the problem never happened.. Basically when i turn the light switch 2 places (dipped beam) every 2nd time i do it, the rev counter drops from idle > 0 then back to idle within a second. My...

Right, for more than a year now my oil light comes on everytime i start the engine and hit abour 1500rpm. Once i've stayed about 1500rpm for about 10secs it stays on and constantly flashes until i turn the car off. Now I have gotten used to this over the last year or so, but it does do my...

In theory, would they fit a Leon and would the dials work?

Is there any sort of guides to help me with this? Search didnt turn out anything. Anyone done this before?

i just drove to work this morning to find that all of the clocks on my Ibiza 1.4SXE are not working the water temp, revs, speedo and the fuel gauge all dead but clock and mile-ometer still on :wtf: im puzzled any ideas on the matter. :cry: Cheers James

i read that when u swap clocks u need to recode the immobilizer in the clocks, to do this u just need to do an ECU swap, so i did it and the clocks still arent recoded, anyone no whats up or give me any advice ? cheers

A while back i buggerd up my clocks by taking them apart to change the lcd display bulbs now my rev counter constantly goes backwards and i have no milage, i have brought myself a set of 2nd hand clocks and was hoping i would be able to transfere the my old milage to the new clocks but i have...

took my clocks apart today to put the old clear bulbs back opposed to my blue ones, when i put it all backtogether and into the car the rev needle just goes constaly around the dial the bulbs where the milage and clocks are dont light up and i have no time or milage on the displays! :cry...

Ok im probably getting a pain now! Seen some clocks for a 2003 cupra on ebay. I have the pre-facelift 2001 - black dials, these are white, so id like the white dials! The plastic screen on the clocks is scratched, so 3 questions really. Will the 03 clocks fit into the 01 lc? Can i...

I have some gti clocks on the way to replace my standard clocks. my clocks dont have a rev counter on it but the gti one does, can i get the rev counter to work when fitting in the gti one in?? should there be the connections there in the wiring loom ready to connect?