changing

Hi everyone Needing to change as it has gone how hard is it to change and do i need any special tool at all Thank craig

As per the title, I can't get a socket onto the 1 remaining bolt on the flywheel end of the sump. I've tried using a thin extension bar and universal joint but I just can't get it to go on. I've spent the whole afternoon cursing and swearing, my neck is agony from lying on my back underneath the...

hi guys just bought a seat leon cupra r 210 but ive noticed the revs seem 2 hold for a little while when changin gear? is this normal as ive owned cars b4 that dont do this any help would b handy many thanks

I changed my front brake discs and pads over the weekend, and did a thorough job as always :) But now when accelerating I am getting a vibrating or pulsing through the pedal. I don't really feel anything coming through the steering wheel which I thought I would have if it was the new...

I'm looking to have some coilovers fitted (as soon as i've decided which ones) and i was wondering whether there are any component i should be looking to change while I've got the suspension off? Possible some new top mounts? Thanks in advance Jim

This doesnt happen all the time, but every few gear changes (mainly coming into 2nd, 3rd and 4th) the car does a short shudder (almost like 2 small jumps forward). It lasts maybe a second then goes away. I took out the spark plugs and cleaned them the other night, could there now be an issue...

Hi All, To ask what is probably a really dumb question..... If changing my newly bought FR from 17" to 18" black alloys, i presume new tyres have to be bought aswell? Isthere anything else to take into consideration i.e lowering the car etc Apologies for the dumbasss questions, have...

Where abouts is the filler cap, and drain cap on the gearbox, if any peeps would have pics would be very very helpful? Cheers Craig

can some1 give me a quick tutorial on changing the rear number plate lights?

I was wandering if anyone could tell me how to change the front brake hoses on the Cupra? I know how to get them off the caliper end (easy) but the other end where it goes to the metal hose. I can't for the life of me work out how to loosen it..! Anyone enlighten me? It's annoying me as it...

It'll be for a Mark 2 Toledo, but I'd appreciate any Leon owners views as well. I'm getting closer and closer to getting the suspension changed, but the manual suggests is that most if not all the bolts need to be replaced. Obviously these bolts don't come with the suspension kit, so I was...

How difficult is it to change a clutch? Mine has gone and wanted to know what is involved in doing it? What do i need to remove to get to it and is investing in a haynes manual worth a go? Im not a proffesional or anything and im quite mechanically minded, and i do potter about with my car...

hey quick question, my exhaust mani is blowing out somewhere. not sure if it gaskets or mani cracked. mechanic is real busy at min and was wondering is it hard to change or just matter of taking off an putting on again. do i need below the car to do it as well. would try it myself but being a...

Was pulling away yesterday and noticed a rattling sound when i depressed the clutch, drove home with the radio off and every time i pressed the clutch pedal down it made the same noise. I noticed a knocking in the clutch pedal a few weeks back, that goes away when the clutch is down so i...

can anyone tell me the compression ratio on a lcr engine code bam please? and what are standard size pistons? thankyou

first bit of help I need. believe me it wont be the last I'm looking at changing the factory stereo in my 1998 Alhambra. what I want to know is this, is there anyway to adapt the new stereo so I can use the factory remote stalk. my wife is adamant that it has to be operational, if...

does anyone know how to pull out the original licence plate bulb holders?(the black housing) i cant seem to get it off to replace my standard bulbs with my new hid ones!

My LCR is on a custom code stage 2 and seems to be running fine. However BHP is down to 219 not its usual 258 and the MAF is only sucking in 178 g/s. Torque is normal at 287 ft/lbs and so is the boost peaking at 22.6 psi. Im under the impression that the MAF should be reading around the 212 g/s...

hello, need help quick. Done a search but found no definitive answers. Just there i went out in my car,when i put the foot down,power comes in as normal,but when i change gear,my car hesitates for a full second before power comes back in.theres no power for a second,then it comes bak in...

hi all, me and my mate was doing a service to my car last night but when it came round to fitting my new brake pads and disc's, we couldn't get the pins out of the calipers to get the pads out. can anyone help us out and does anyone no how much 4 new pins would be? its a tdi cupra so iv got 4...