cda

Hi all, iv got a BMC CDA fitted iv heard on here that its not the best at its job, what kits would you recomend? I thought that an enclosed kit would be better for inlet temps? whats peoples thoughts? J

I'm fitting mine tomorrow.. Does anyone have one? Any gains? Whats your thoughts? :)

Well having tried the following filters on my car i thought id post a thread about the best ones: Tried a: K&N 57i BMC CDA 85 - 150 ITG Open filter JC60 - 80 The K&N was fairly old, but performance felt fairly restricted, and so i opted to fit my BMC CDA. This felt totally different...

I've got an Alpine CDA 9835R that i've had for a while and i took it out today (needed to do that for another reason) but when i was putting it back in i wondered if i could get the dimmer switch next to the wheel to dim the HU - measused it up and found the pin that controlled the lights - all...

Am thinking of getting a BMC CDA or dynatwist, currently have a PD160 & green cotton filter. Wondering if they are worth the cost? Cheers

Ive got the bmc cda kit on my lcr. i moved the tubing to a better air location and its changed the sound now. the whistle of the tubro is really, really loud from the inside of the car. has any body else found this. ive put it to the front light where the original air feed from the vent goes...

Hello has any1 got this on there car just wondering where the best place to put the cold air feed is. thanks in advance.

Hi all, Will the BMC CDA ASP09 induction kit go straight onto my Cupra, or do I need a different part number, and where's the best (cheapest) place to purchase them from? Thanks in advance.

i have a stage 3allard turbo conversion with all the bits n bobs, i have a green pannel filter in the original airbox and was debating getting the cda enclosed filter. I was wondering if anyone had an enclosed filter on there diesel and if so how does it sound? As i have a bigger turbo i...

hey does anybody have one of these fitted and is it possible to post a picture so i can see if mine is correctly fitted or if i made a mess :confused:

hi guys just installed the bmc-cda into my lcr. are there any tips with regards to after installation as in resetting ecu, or throttlebody allignment? or does the ecu adapt right away to the induction kit on its own right away? any help be appreciated. many thanks gulzar

If anyone has an LCR can they please tell me what the correct part number is for the BMC CDA Filter? A few distributors give different numbers, and the search through back the same problem. Cheers all Lee

as above has anyone fitted this or running it on there car at the moment. i have one lying about the house at the moment not sure whether to fit it. i have a dynatwist fitted the now cheers andy

Hi all!! Im looking to get a BMC CDA kit, I have seen them for 70mm and 80mm outlet? I think i need 70 but not 100% sure? can someone clarify this. I know loads of places do them but can someone recommend a good place to buy from? And if there is anything i should know before buying and fitting...

How do peeps, hope everyone is well, Sorry to bore everyone with this, but i have finally decided that i am going to invest in a BMC CDA induction system, but.......the problem is that they do not make the fittings for my engine apparently, but the system is universal anyway. I need a...

Hi everybody I've finally fitted the CDA SP12 on the original induction! To start with I wanted a new induction to the turbo. http://www.meth.dk/nordicturbo_005.jpg But we could not manage to fit it, we could simply not get our hands down there!! I would be a big fumble! So we gave up...

Hi all Been offered a bmc cda from a friend who's selling his LCR. I need to know if it will fit an LC. Is the LCR outlet 80mm? mine on the LC is 70mm. If it is a different size outlet, is there a way to step it down to 70mm

I have posted this on the modification section but no replies yet Where can I get the same hose that comes with the BMC CDA kit (80mm) I'm looking for about 1 1/2 metres Cheers

Hi everybody! Just tried to fit my bmc cda sp-12 and from what I could see, it would fit! It's a bit of a struggle and you have to buy another cold airfeed, becasue the one supplied it not that much felxibel! bought this tube from green filter in germany...

Hi there, just bought a Bmc Cda on ebay for 250 euro(new). But I'm having a bad feeling about this. First of all: Question: CDA not original? Check how to find out…!!! Before buying a CDA® online, if you’re not sure about who’s selling or simply where the item comes from, use these...