camshaft

  1. Locations of crankshaft and camshaft sensors?

    I have a no-start car (seat ibiza mk2 1998). I would like replace the camshaft and crankshaft sensors but I don't know the locations of these. Can anybody help?
  2. Camshaft tight.

    Hi all Recently done the head on the ibiza, just a question. Is the camshaft supposed to be tight after installation? Had to change to outlet valves and now the camshaft seems to be pulling back (I cannot pull the locking tool out of them). Didn't fancy belting it up incase this is an issue...
  3. How difficult to replace a camshaft position actuator?

    My garage are quoting 7 hours of labour to replace a camshaft position actuator on my 04 Leon Cupra. Does this sound reasonable? Its annoying because they origionally quoted 1 hour of labour but now are saying it is much more difficult than they first thought. Argh! Cheers!
  4. ljpacey

    camshaft solenoid and n75 valve

    hi fellow ibiza drivers (Y) well lets start my 1.8 20v fr was runing awesome untill a coil went so i got a new one and its still was the same :L so i replaced the hold lot and it was still runing boggy around 3000rpm :confused: so i have the spark plugs out to see if they had carboned up and...
  5. Camshaft orientation

    Hi, My apologies if this has already been covered, but I tried a search on this and nothing came back, anyway, here goes. We are rebuilding the head on our 1.8t, and are working for some of the info from a golf mk4 Haynes manual. I get the bit about the 16 rollers between the rear sprockets...
  6. MIkey kc

    Are the camshaft the same for a AUB engine and BCB

    Hi i have a friend that has a seat arosa 1.6 16v 51 plate 100bhp i think. The inlet camshaft has seized and snapped, im trying to source a new rocker cover including cams. The engine code for the arosa is AUB but i cant find any of those engines bein broken up for parts but there are afew leon...
  7. Camshaft Position Sensor - Part Number???

    Does anyone have the part number? Either Main dealer number of GSF mart number? I've searched and all the results just show people asking for the number, and just getting replies basically saying the timing will be out and that the sensor never breaks....
  8. 2 Problems - Air Bag Light and Camshaft Sensor

    Ok, so I got the car back yesterday after having the peddle box done and a full service The airbag light is on. Apparently this is beause they took the drivers seat out. The light comes on with ignition, then when I fire it up, it goes off and back on again in a flash! Been told only VAG COM...
  9. chumsofmanutd

    camshaft sensor causing miss firing

    Having problems with the car. It will start but it wont rev above about 500 even with throttle, its very lumpy and miss-firing like hell! I get a camshaft sensor error on the vag com, does it sound like these problems could be caused by this? Thanks Rob
  10. Cupra & Cupra R p/n's for Cams, Coolers, Clutch/ Flywheel/ Box, Turbo, Fuel Pump etc

    Spoke to a reliable source there just now with dealer ETKA and got the following information We are assuming that based on the 240bhp posted in the 2010 ETKA, that the BWJ engine has been replaced by the CDLD. No access to previous version of ETKA means that it is possible that moving...
  11. chevychase

    camshaft speed sensor

    hi am not really up with the whole posting bit but to cut along story short a got my leon fr+ tdi in april and its been back to the garage for the camshaft speed sensor 8 times. has anybody else had problems with this sensor as i love the car but this is ruining the enjoyment of driving it.
  12. camshaft sensor!

    Hello, just had to buy a new camshaft sensor 4 my LCR as my car was having problems starting, although now i need to fit it and i'm not sure where its located?! can anyone show me on a pic or anything?
  13. seatcupramad23

    fault code p0011 (camshaft timing over advanced)

    hi i got a seat leon cupra 2001 (r lookalike). fault code showed up last 3 weeks p0011 , camshaft timing overadvanced , took to the garage they they noting wrong with the camshft , u wud no if the cam was fault it would be making alll sorts of funny noises, the car still drives perfect , im lost...
  14. G2232

    camshaft set point mechanism

    Does anybody know what this is? what it looks like? How to fix it? Garage has just told me it need changing and its going to cost best part of £700 :cry:
  15. camshaft sensor

    Hello, I have been having problems with power drops in the car when driving and occasionally she wont start for me. Brought it to the dealer and the fault reading is the camshaft sensor. Just bought one of these and was wondering firstly would both these problems be caused by this and...
  16. rocky2008

    Camshaft chain

    just had the side of my engine then to see that it the timing on my engine was 2 teeth out :( i also need a few new timing chain cover bolts as the heads are quite badly worn, will be fixing this tomorrow all been well, does anyone know weather my car will automatically get it self out of safe...
  17. G2232

    camshaft adjuster

    As title reads vag com is telling me that there is a fault with it. Does anyone 1 know where it is 2 know if its a bitch of a job 3 how much they cost to replace 4 how much garage whould charge to fit if its a bitch? and sorry for posting here but is actually for my brothers TT and...
  18. kineticz

    Camshaft Position Sensor (G40) / Engine Speed Sensor (G28): Incor. Correlation

    Camshaft Position Sensor (G40) / Engine Speed Sensor (G28): Incor. Correlation What the...?
  19. camshaft pulley fixing bolt sheared

    We have an old S reg seat Ibiza salsa. This morning my good lady was driving to work when everything went pear- shaped. A loud thud then twang and the car stopped. long story short, the bolt securing the crankshaft pully sheared. The pulley came away from the engine leaving the timing belt...
  20. leon camshaft

    Hi folks anybody know where i can get an 04 seat leon tdi 150 cupra camshaft from Cheers nick
SEATCUPRA.NET Forum merchandise