Nimbus hosting - Based solely in the UK.

  • Guest would you be interested in CUPRA or SEAT valve caps? let us know in the poll

  • Welcome to our new sponsor Lecatona, a brand dedicated to enhancing performance for VAG group sports cars, including SEAT, Audi, Volkswagen and Škoda. Specializing in High Pressure Fuel Pump (HPFP) upgrades.

breather

  1. abstract

    Catch Can Installation [Correct Way]

    Hello fellow enthusiasts! As this is my first post on the forums, I'm going to talk about one of the first things I did when I purchased my Mk1 Leon Cupra R. There are so many indecisive guides and threads out there that either provide the wrong information, or haven't got enough info to...
  2. SalSheikh

    breather filter

    any idea's what size breather filter is needed if i am going to use an induction kit? looked on ebay and the sizes range from 9mm to 15mm :shrug: thanks
  3. gtikezz

    breather pipe

    just wondered if anyone knows where to get hold of this breather hose ? thank you :D
  4. rsmith

    Breather pipe

    Howdy all, My breather system has sprung a leak and while i am waiting for new parts i would like to apply a temporary fix, in the below diagram part number 24( 06A133783)just off the suction pump Y connector is split, i was thinking if i could just use some silicone hose in its place, does...
  5. caztech

    Crankcase breather pipe

    Does anyone know where I could get a crankcase breather pipe for a 2.0 gti cupra sport? thanks

  6. Split breather

    Hi all. Quick question for you guys would a split breather pipe throw a engine management light cheers
  7. ashley600

    breather hoses

    just found a spilt breather hose under the engine cover, looked on awesomes website and they are sold as a pair for £60, anyone know where i can get just the top one in silicone. found a forge on from DPM but its in three pieces:confused: is this right, has anyone fitted one???
  8. Breezapom

    Breather hose squashed

    Was looking in my engine bay earlier and noticed this I'm guessing this isn't supposed to be like this. if your unsure what it is it's the breather hose just where the intake pipe would be for the air box
  9. Gravesie-363

    LCR Breather Filter

    I have recently purchased a jetex filter (surprise surprise) for my LCR! Now i cant find the thread now, but im sure i read somewhere that a breather filter has to be used on an exsisting pipe that goes into the original airbox?! Can someone point me in the right direction as to what...
  10. Righttoe

    HELP! Oil Breather System Frozen!

    Hi guys, am in need of some desperate help here! On the way to work the other day on motorway all of a sudden there were massive clouds of white/blue smoke from exhaust, pulled over and smelled very oil burning like! Was almost at work, so got there and left it till home time, on journey home...
  11. gezmeister

    Spongy top breather pipe

    Ok Just installed my Forge 007 dv :D but when having a check round the engine bay, i thought i'd better check my breather pipes as i'm having a stuttering issue. Bottom pipe seems fine, and although the top on doesn't appear to have any splits, when you squeeze it, it feels very spongey...

  12. PCV/ Breather hose

    Hi Guys, Been having a slight problem with boost for a week or 2 and have been over all my hoses and double checked since I fitted my THS boost hose kit, to check that fitting the new hoses hadn't caused the problem. Found a split on the Y-shaped PCV/ Breather hose and think this could be...
  13. suj

    Breather Pipe Name/Part Number (ABF)

    Hey, does anyone know the part number for the breather pipe that comes from the square box into the engine? it goes into the engine just below the rad top pipe. it's for an ABF here's a pic, red has been highlighted to show the pipe needed thanks in advance!

  14. SAI Breather Filter

    Hiya all just a quicky, Got a jetex cone filter on the way and just realised i need a filter for the SAI system, please could a couple of you post a few links to where i could get a cheep one, at work all day so will just check back occasionally. All the best Ben

  15. Misfire when cold, which breather?

    Bit of a newbie question. I did lots of searching and reading but ended up pretty confused so thought I'd just ask. When I start up first thing in the morning the car seems to be missing for the first few minutes at which time it settles and is fine. I read lots of threads after searching but...

  16. 03' Cupra Turbo breather pipe (PCV Hose)

    Hiya guys, i need some help. My turbo breather pipe has a really nasty split and there is a huge boost leak which is ruining the performance on my car real bad. Im after a nice solid silicone hose upgrade for that part but not too sure where to source it from. I had a look on ebay but theres...

  17. Split breather pipe

    HI, Just taken to engine cover off to check things over before a trip and spotted this split pipe, what is this and what does it do? see pic here https://docs.google.com/Doc?docid=0AQ6mt9SxzHNJZDQ1d3puN182ZzViMmhtY3I&hl=en It looks like it's been like that for a while. Also looks...

  18. Oil breather pipe size

    Anyone know the two outlet sizes of the Oil Breather pipe thats on the rocket cover of a BKD Engine off the top of their head? the the OD of them so I can get the right oil pip reducers from sfs. fitting an Oil Catch Can soon. pictures to follow

  19. Typical breather and vacuum pipes that fail?

    Hello Ive got a Leon Cupra which keeps throwing up error codes which can relate to dodgy pipes ive replace two (the breather pipe that comes from the DV area then spilts into two, one going into the cam cover and the other going down to the front of the engine. Ive also replaced that pipe that...
    • jet-black
    • Thread
    • breather fail pipes typical vacuum
    • Replies: 13
    • Forum: Leon Mk1 (2000-2006)
  20. greg

    Should SAI breather come from main intake or have seperate filter?

    I have a BMC (i think) induction kit on my cupra with a cold air feed from the front wing. The back of the filter goes through a 45 degree bend to the MAF. Plugged into this 45 degree bend is the breather pipe for the SAI system. I have noticed on some pictures that other people have the 45...
Chris Knott Insurance - Competitive quotes for forum members
Top Bottom