bleed

I believe my N75 valve is playing up as I'm getting boost surging (std 1.8T). So instead of buying a new one at £60 why can't I simply fit a £25 Forge bleed valve ? I understand I can't raise the boost by much before the ECU interferes but surely its a worthwhile mod. Thanks

Hi, Can someone please tell me how to best bleed my coolant system after replacing the stat, as I cannot find a bleed screw? Thanks Toldeo 110 TDI 2001

Hello Gonna try to improve my brakes by chn=anging the fluid to some quality DOT 5.1 stuff. Will use my trustee Gunson EZEE BLEED and the usual method of caliper furthest away caliper to closest to the MC method (rear ns, rear os, front ns then front os) QUESTION: The Brembos have 2...

Whats the size of the bleed nipples on the brembos? M8, M10? No i dont meen the nut size i mean the thread.

Decided to bleed my brakes today. Bought an Eezibleed and 500ml dot4 fluid. Bled the rear brakes and went onto the front. The nearside was really stiff, so I scraped around it to free it up, still wouldn't budge.[:@] I knew I shouldn't have, but I got my trusty torque wrench out and gave the...

can you fit a bleed valve to an ibiza cupra? any1 ever done it? would there ever be a case id need to ? as i no the boost is controlled via ecu.

Hey guys just doing my rear brakes and after loosening the bleed nut it is just spinning when i put it back in. Whats the realistic outcome of this? Can i just re-tap it and put a plug in or will i need new rear callipers? :cry: Thanks in advance Mark

I've just changed the Cambelt/tensioners water pump and thermostat I've been running the engine with the expansion tank cap off and i can't get the coolant system to bleed, after a few minutes the coolant just bubbles over in the expansion tank. Strange thing is temperature gauge stays at...

anybody got any ideas on how to remove the brake bleed screw from my front calipers, because after the other day i decided to bleed the brakes up as they have been getting a bit spongy everything was going fine untill i got to the drivers side front wheel and found that the bleed screw had been...

hi all. just replaced the power steering pump on my 97 toledo and now it's running a lot smoother, but it still sounds like there is air trapped somehere in the pump. How do i bleed the system, do I just sit an turn the steering wheel till all the air is out OR is there a little gadget...

Need to check the operation of the ABS pump on my A3 1.8T. Can the 10 second ABS pump cycle that VAG-COM initiates be performed with the wheels on the ground, bleed valve shut ie car as normal?

I have just flushed, refilled and bled the brake fluid after replacing discs and pads, but still (as before) have a little bit of pedal travel before brakes bite, which I just don't get. When I did the flush I didn't have engine running, just did normal pump pedal when valve open, close valve...

Hello I need to know if anyone here have fitted a bleed valve to their car with the n75 valve in place still. Reason im asking is my car is spiking too often and making the car go into limp mode, so speaking with Simon Coe from CCCtech ( not an upsolute chip in the car ) but he has been...

Can you explain how to pressure bleed the system - preferably without VAGCOM unless i can get someone to lend me it for a day or so?