bearing

Hi Folks Does anyone have/could get info on the front hub nut tightening sequence & torque settings for an Ibiza 2016 1.2 TSi (6P5 CJZC). I am about to replace wheel bearing hub. I have been searching various forums & workshop manuals, all with conflicting/confusing results. Thanks in advanced...

Evening all. Need some help spent ages striping down the car buying different tools etc to find that my rear wheel bearing is different to what AutoDoc recommended and sent😵‍💫. I am now lost to what rear wheel bearing I need as all sites inc EuroCar parts recommended the one I have had sent but...

Hello all, Doing a wheel bearing change and have been supplied with a different axle bolt than normal. This one comes with a hex head and a washed instead of the standard twin hex head. The normal torque setting is 200nm + 180, however I’m unsure as to what it will be on this. Any help would be...

Greetings, I am doing (almost) complete overhaul of my 2007/8 Cupra. I have everything ready besides big end conrod bearings. Are these the correct ones https://www.ebay.ie/itm/MAIN-SHELL-BEARINGS-KOLBENSCHMIDT-77-537-600/263308101716?hash=item3d4e62c854:g:Ox0AAOSwSQFaAxZA ? It fits way too...

Hi All, I have a noise coming from what I think is the rear nearside wheel. From what I can gather I think the wheel bearing is on the way out. Would I be right in thinking that you have to replace the hub as well due to the bearing race’s being integrated? I’ve seen some on ebay for £35...

Hi I have tried to find this by searching but getting no where (it may just be me!!) Changing the clutch as it is starting to slip on full boost. Question is do i have to change the whole Slave Cylinder or can i just get the bearing? Seen clutch and bearing on ECP for reasonable price...

Hi everyone Needing to change as it has gone how hard is it to change and do i need any special tool at all Thank craig

Hi peps, help required again!! After failing to find my knocking noise (thought it was from the tyres, see previous thread) I put the car down the local VW/Audi independant garage. Wheel bearing was buggered so this was replaced to the tune of £230 all in! (parts totaling £120?) Picked...

Hi Does anyone have a diagram of the from hub setup I need to replace a wheel bearing but normally they are pressed into the steering knuckle on most cars ive seen but..... From looking at certain pictures of ibizas the hub is a completely seperate part and it looks to me they are...

I had problems with my wheel bearings at the start of this year. To cut a long story short, the garage had trouble finding which one it was, but it got fixed eventually, and turned out to be the left rear. My dad has an 06 plate Ibiza too, a 1.4 Stylance. Both registered within a month of...

It seems that one of my wheel bearings is on it's way out. At the moment we can't tell which wheel it is but the noise is coming from the passenger side. The brake discs and pads will need replacing soon so I thought I might as well get the bearings at least checked out throughly whilst the...

Hi there, does anyone know the part number for front wheel bearing for a leon 20 vt fr ,its a 05 reg . thank you

One of the rear wheel bearings is on its way out on the Altea, It went in to the dealers Tuesday to have both sides replaced but seems they discovered that they did not have necessary tool to remove them!!! Has anyone carried out this Job and knows what tool is neccesary. They have advised that...

Hello all. Firstly sorry if It has already been posted on here but does anyone have a DIY guide for replacing a rear wheel bearing on my Mk1 leon tdi 05 plate. I am told the part is a full unit ie: not just the bearing that are changed but the part bolts onto the hub! I think! thanks. ;)

Loud goring noise from front n/s possible wheel bearing think of getting a snr wheel bearing kit from euro car parts are these any good .

Hi my 06 fr tdi needs a front bearing but does a new one come complete with a hub or is it a bearing on it's own. Also how big a job would this be. Thanks in advance

fitted my 18's today looks good if you ask me, shame they make the wheel bearing noise intolerable so its back to the original 16's as the starfish rims are to go drives very nicely on them tho gonna have to do the bearings i guess, there was noise before on the 17's but nothing like now...

hi, im getting quite a loud rumblering noise coming from either the back or front of my car when im slowing down. one of my mates who is a tyre fitting reckons its a wheel bearing that has gone. if that is the case how much will it cost to get it fixed? cheers

Hi guys, and happy new year to you all.:cheers: My leon has developed a droning/groaning/rumbling noise, which is progressively getting worse. It sounds like its coming from the n/s/f corner, but im not sure how to determine whether its the bearing or the CV joint. If its CV, i would have...

hi, i have a leon 19.9tdi se 2001, recently i have been getting a grinding noise (metal on metal sound) when i turn right and low speeds, very noticeable at roundabouts. i have replaced the front pads and discs as these were worn and wondered if had warped discs but the noise is still there...