bank

Anyone able to shed some light? My Engine light came on about a month ago then went off a week later. Came back on again the next week and stayed on. Got it vag-commed with 17545 Fuel Trim: Bank 1 (Add): System too Rich and 17705 Pressure Drop between Turbo and Throttle Valve (check D.V.!)...

I bought a 2002 cupra r last week. Since owning it its been terrible on fuel and the power seems to die when im driving hard through the gears and some times splutter. Ive done diagnostics on it and its came up with p1453 exhaust gas temp sensor bank 1. Does any one no where this is located? I...

Well I seem to be getting a small fault with my car that comes and goes. Once I clear the fault it's fine, then goes into limp mode, then sometimes comes out of it during the same drive, then goes back in etc etc. Always this code here: 17536 - Fuel Trim; Bank 1 (Mult): System too Lean...

Diagnostic light came on this morn accompanied by a whining noise from underneath the car near the back (fuel pump?) Fuel Trim: Bank 1 (Mult): System too Rich P1127-35-00 Any ideas? Thanks

...Yup - it's another gratuitous bribe from your friends at YourRacingCar.com! My wonderful friends at Brands Hatch MSV have come up trumps and decided to support our little venture in the way they can - FREE PARKING ON THE SOUTH BANK!:lol: It's limited numbers and as you know we're...

Brands Hatch BTCC Infield Parking - Sun August 19th 2007 Again with the generous help of SEAT Sport UK and Brands Hatch/Motorsport Vision they have secured South Bank Parking passes for us, if you want to come please don't delay. As always it will be first come first served! But I do need to...

My exhuast is causing major issues and its winding me up! Keep getting Bank 1 Fault. (Running Lean) Keep getting low boost 5-7psi aswell and the exhuast sounds loud! The Exhaust after going to SEATtoday seems to be different size at the joins so they have put sleaves in?! First join...

Ive got the same damn problem coming up again and again. I know this has been mentioned a lot on here and a load of threads have been started about similar problems, but I seem to have narrowed my problem down to a specific way of driving. The light seems to come on and the error pop up if Im...

17536 - Fuel Trim: Bank 1 (mult) system too lean P1128-35-10--------intermitant This damn code is driving me bonkers, even more so now i've got Revo, i seem to go into Limp mode more now. I've read all i can read, and found these as the possible symptoms: 17536/P1128/004392 - Fuel...

The 1st rounds of the british Rall Cross season starts at Lydden Hill on Bank Holiday Monday 9th April I will be down there anyone else fancy it? Tris Smooth J@mes (maybe) Roly Martin M Kier Gaz & Amanda

Help Bank 1 Can anyone help with this fault? I have a 100-cell cat and since having it fitted I get this fault code every few days 16804 P0420 Catalyst System, Bank1 Efficiency Below Threshold. My understanding is that after fitting a high performance cat the gas flow post cat is...

Rally cross at Lydden hill near Dover Kent bank holiday monday 28th august Gates open early first races about 10am warm up from 9am price is 10quid each under 16 free worth every penny slap the bbq out and chill plus you dont even need to leave your car if you dont want to as you can see the...

Ok, talk about last minute panic. I think m0rk planned it this way for me. :whistle: We've got '50' passes for South Bank parking at Brands Hatch BTCC, for this Sunday April 9th . :funk: 33 of us are now confirmed, about 15 passes approx, still looking for members to use, as we've got a...

Is there going to be any SEAT parking on the south bank for BTCC or for WTCC at Brands Hatch??

Guys, As of yesterday I've managed to pick up the above fault code. If I clear the code the car runs fine for a few miles before popping back up and running in limp mode. After much searching and reading I've tracked it down to 3 possible issues...MAF, Lambda probes or Boost/VAC leak...

Well some of you know I had my car on VAG-COM after my diagnostic light appeared and I got an error but I couldnt quite remember the exact wording. Well my own interface from Ross-Tech arrived today (took 48 hours from USA) got it all installed and plugged it into the computer and the full code...