20mm

Hi all, Just wondering if any1 could tell me the bore size etc for 20mm spacers for a Mk4 ibiza Cupra TDI? Are they 5x100 & 57.1mm centre bores? Thanks Mark

Does anyone know if i can get 20mm springs, i dont want to go really low, but running 18" rims and just want to settle the height a little bit. Anyone know whats the smallest drop i can get or anyone know how much lower Cupra R springs are over standard FR ones ?

finally got my car back on the road after all the mods, not sure if it is the spacers causing this but has anyone else noticed any rubbing due to the rear spacers? either that or its coming from somewhere else? any ideas?

right guy's before you tell me to search, i have done, ive been looking for about an hour now, i can remember a while back Hooch said that you could get some 20mm hubcentric spacers for around the £40 pricemark. im just wondering if anyone knows the website or can remember themselves where...

i just bought myself a full set of 20mm lowering springs and a neuspeed induction kit (second time round) for the small fee of £50 all in woop woop.

thinking about either 15mm or 20mm spacers on the rear but is 20mm too wide, my card already lowered a fair amount of standard alloys. so is it too wide i ask :D?

I'm looking to replace the current bolts that were issued with the 40mm (20mm each side) hubcentirc spacers from FK automotive as they're rather rounded and beaten. Had a look on europerformance and venommotorsprt but had no luck......so yes, please help. Bolts are 42mm in length and are...

firstly they are hubcentric which after reading and probably asking on here a while ago i was led to believe they are the ones to get. am i likely to see any problems with having 20mm spacers on each side? (not lowered at all and unlikely to get lowered tbh) wheels are 17" rs6 replicas but...

I have a 2007 1.9 TDi Sport Ibiza with standard 16inch 'sport' rims, currently lowered to the bottom on coilovers... Now the wheels sit under the arches quite a bit and it looks crap, just wondering would this kit be okay on my car...

Hey peeps not posted for help in a loooong time! :) I want to get 20mm hubcentric rear spacers for my vRS wheels what are the measurements? I already know I want AC mototrsport ones as that what you guys have used but it just says ibiza no year?

Anyone had any rubbing issues running 20mm spacers on the standard Cupra alloys when lowered? I'm running 15mm on the back at the moment but they still don't stick out as much as I'd like. TIA, Rob

I've searched on the forum and a lot of people go for 15mm back and 10mm front. Got some 10mm for the front but wondered if anyone has fitted 20mm on the back? Has someone got a pic of them on?

Im thinking of fitting 20mm hub centric spacers to the rear but woundered if it will look odd without any on the front end,also if i fit these will lowering by 30mm on 17"'s cause problems,I would greatly appriciate some feed back as i dont have alot of cash and dont want to buy and be disapointed.

I know this has been discussed before but i cant use the search thing at work for some reason! keeps coming up with an error. I just bought new alloys, posted in here about them and i can tell the back wheels will need to come out a bit, from what i can tell you dont do the front with...

i know theres probably a load of posts on this but i was just making sure im looking at the right spacers for my car, and if anybody has these specific ones, what are they like? any good?, i've heard of the H & R or whatever there called but i found these ones on the bay...

can a have peoples opinion on these spacers please? iv bin thinking about getting some and these seem to be good or if you no of any others that are better then it would be great. Also when a do get some spacers will my locking wheel nuts which iv got in now still be ok after iv fitted them...

can anyone tell me what leangth wheel bolts should be used when fitting 20mm spacers.i have 35mm ones just now from a set of smaller spacers but not sure if they are long enough

I've got an 96 ibiza 1.4 with 10mm thick non vented discs on it, I'm just wandering if it would be possible to put 20mm thick vented discs on there. Any help would be appreciated.

Hi all I have done a search but no results! Can anyone tell me what size wristpins are on the AYP block... 19 or 20mm? Also is it true if you change just the Rods then 400hp is possible with OEM pistons?? Many thanks in advance! p.s.... AYP Polo Project thread soon to come!

Ive read that quite alot of u have put 20mm spacers on the back of the ibiza but does it actually handle any better? under/oversteer more/less? also will it cause 17's to catch as i have coil overs? cheers