GU62 coolant sensor - I need a new one

m.r.davies

God's Property

Jun 13, 2006

608

0

Cardiff

• Sep 15, 2006

• #1

My Leon cupra R has got the engine light on

I’ve rigged up vag com and its saying imtermittent fault with coolant sensor, reading too high.
GU62 or something


I take it I need a new sensor, How much are these? and has anyone got a part number?

Also how the heck to i fit it, is it easy or shall i pay for it to be done?

Thanks
Mark

 

muttly

Full Member

Oct 1, 2005

200

0

Stamford Nr Peterborough

• Sep 16, 2006

• #2

yea i think u'll find they r comon things to fail..especially if its and old black top sensor... apparently the newer 1's come wiv a green top sensor which is more reliable.. they are dead easy to change from what i can gather and cost around £25..

i have seen a guide somewhere tells u exactly wheere to find the sensor in ur engine..and tells u how to change it

 

Mitchy

TTRS

Oct 12, 2004

2,310

0

• Sep 16, 2006

• #3

Yes they cost around £30 and its a very common fault.

I changed mine for a green top sensor about a month ago and it takes about 5-10mins to fit!

 

m.r.davies

God's Property

Jun 13, 2006

608

0

Cardiff

• Sep 16, 2006

• #4

thanks mitchy
can someone tell me where the sensor is located and how i change it ...novice boy here!

 

Mitchy

TTRS

Oct 12, 2004

2,310

0

• Sep 16, 2006

• #5

Yes its on the right hand side of the engine, just above and to the left of the gear linkage.

Easy to change, release the pressure in your coolant system by unscrewing the cap! Tighten cap back up (Make sure you do this before pulling plug out otherwise you will lose all your coolant fluid, like i did )

Once you have released pressure and tightened cap back up, pull the little circlip out with a pair of pliers, pulling towards you! This will come out and enable you to simply just pull the plug out!

Fit the new O ring and push the new green sensor in with a little bit of force so it seats correctly! Refit the circlip and make sure it secures the sensor, top up coolant fluid if neccessary and go for a drive to get the coolant upto temperature. Recheck sensor to make sure it is still seated correctly and job is done!

Piece of piss! Remember and work on a cold system, do not drive the car before doing the job!

 

m.r.davies

God's Property

Jun 13, 2006

608

0

Cardiff

• Sep 18, 2006

• #6

cheers mate,

Shall i go directly to seat for this or are there any other places i can get one cheaper?

 

Mitchy

TTRS

Oct 12, 2004

2,310

0

• Sep 18, 2006

• #7

No just go straight to your dealer, doubtful you will get it cheaper anywhere else.

 

m.r.davies

God's Property

Jun 13, 2006

608

0

Cardiff

• Sep 19, 2006

• #8

Ok its £26.28 for the sensor, i'll have a look at it this evening

I've found this article
http://www.audiworld.com/tech/eng66.shtml

it mentions this
" found write-ups that I believe were for the B5...but it seems MUCH harder to get to on the B6, so I decided to do this write-up."

Is mine a B5 or B6 ?
Cheers
Mark

 

m.r.davies

God's Property

Jun 13, 2006

608

0

Cardiff

• Sep 19, 2006

• #9

actually this article looks better

http://www.carrel.org/articles/2005/08/13/replacing-audi-tt-coolant-temperature-sensor

 

Kris

ESTATE! I'm Getting Old!

Nov 21, 2003

808

0

North Essex

Visit site

• Sep 19, 2006

• #10

I always find scoda do VAG parts cheaper that SEAT and VW. Its all the same part!!!

 

m.r.davies

God's Property

Jun 13, 2006

608

0

Cardiff

• Sep 19, 2006

• #11

Kris said:

I always find scoda do VAG parts cheaper that SEAT and VW. Its all the same part!!!

Click to expand...

feck!

good job i didn't go to audi garge then