Result from Powerstation

Si · Feb 18, 2006

266bhp 280lb/ft Plot

My spec is in my sig. I'm over the moon with the result / Pub talk but it shows what a great job www.e-maps.co.uk have done.

Martyn came too and he will probably be along with his result too

The new Powerstation place is really awesome

My Vid is here

Feedback would be good :thumbup:

Martyn · Feb 18, 2006

Was indeed a good day! Very impressed with how they ran the cars, very nice setup too

My car pulled 226bhp with 258lb/ft torque.

Vid is here... http://www.westover.org.uk/si/power/martyn.wmv

Plot is here... http://www.westover.org.uk/si/power/martyn.pdf

Thanks to Si for organising the day

Sulli · Feb 18, 2006

Good result - how much was the emaos?

vern · Feb 18, 2006

Great results Si backed up EXACTLEY to your maf g/s readings i said 265 bhp @ those readings, you,ve pretty much done all you can, bar a bigger turbo now

Boost is very linear, and holds well as does the torque to redline, bet that one smooth Lcr mate to drive [B)]

Congrats man

vern · Feb 18, 2006

Martyn said:
Was indeed a good day! Very impressed with how they ran the cars, very nice setup too

My car pulled 226bhp with 258lb/ft torque.

Vid is here... http://www.westover.org.uk/si/power/martyn.wmv

Plot is here... http://www.westover.org.uk/si/power/martyn.pdf

Thanks to Si for organising the day

Great results Mart, glad to see your car is finally doing the biz you always knew it could, the jap crap is in the past hey now mate?

you gotta be happy with those figs :funk:

Martyn · Feb 18, 2006

vern said:
Great results Mart, glad to see your car is finally doing the biz you always knew it could, the jap crap is in the past hey now mate? you gotta be happy with those figs

Yea, happy with the figs dude. It does leave me thinking though....how come my max airflow on the dyno run was only 141g/s yet the car is putting out decent figs? A week ago the car was pulling just under 160g/s :shrug:

As for the end of jap crap?....Na

Si · Feb 18, 2006

Sulli said:
Good result - how much was the emaos?

Hi dude, best to give them a call. Tell them your from the website and you saw my results as I'm the first LCR they have done, thats why I've been able to customise it!

vern said:
Great results Si backed up EXACTLEY to your maf g/s readings i said 265 bhp @ those readings, you,ve pretty much done all you can, bar a bigger turbo now

Boost is very linear, and holds well as does the torque to redline, bet that one smooth Lcr mate to drive Congrats man

Thanks Vern, she is very smooth. I asked E-Maps to make it as smooth as poss after 328 ownership. I one happy dude! :clap:

vern · Feb 18, 2006

LOL martyn, i'll let you get an nsx or evo but that's it

dunno on maf readings mate as i know you get higher 160's etc strange eh?
as long as you are pleased with how it drives and there are no fault codes thats the main thing

Martyn · Feb 18, 2006

Definately not getting an evo...unless its a tuned 6/6.5...my flat mates Evo 8 was dull as dish water

NSX...need me a few payrises for that one!

Happy as can be Vern...still needs a K03S and an LSD though.......

GaryM · Feb 18, 2006

Martyn said:
Happy as can be Vern...still needs a K03S and an LSD though.......

Has the Ibiza Cupra R not got a K03s turbo?
Assuming not by your quote, if thats the case then im really impressed by 226bhp from a K03 :-o

m0rk · Feb 18, 2006

No - defo a k03 on the R

I was suprised too!

Daz_gibbo · Feb 18, 2006

When i first saw your result Mart, stright away I looked down into your sig looking for 'KO3s'. Very good figures. If my car made near that i'd be very happy! Spec quite similar

vern · Feb 18, 2006

m0rk said:
No - defo a k03 on the R

I was suprised too!

Holy cr@p thought they had a k03s all more sweeter then Mart eh?, revo stage 2 works then!!! [B)]

Martyn · Feb 20, 2006

Certainly does Vern. Makes me wonder whether it's gonna be worth getting a K03s now....?

ibizacupra · Feb 20, 2006

did you do the logs you were talking about Mart?

Martyn · Feb 20, 2006

Bill, I did but I didnt really see much difference as the MAF was reading low 140's that evening

Martyn · Feb 20, 2006

Well....after a coming home from my parents tonight I think we've discovered the problem lol. MAF expired (Signal too low)....Time of death...19.34pm 20/02/2006 - RIP!

DPJ · Feb 20, 2006

Martyn said:
Well....after a coming home from my parents tonight I think we've discovered the problem lol. MAF expired (Signal too low)....Time of death...19.34pm 20/02/2006 - RIP!

Martyn, under the userdetails below the avatars, can we have a field for MAF kills? I'm on #4, I think Custard Cupra is on #6.

Martyn · Feb 20, 2006

Might have to look into sorting that lol!

ibizacupra · Feb 20, 2006

I have lost 2 since 2001. both within 1 week of IHI'ing first time. both caused by vibration shocks.

been perfect since.

vibration islolation is the key I think. (and a whole load of luck perhaps)

Search

Result from Powerstation

Si

Southern MoFo!

Martyn

Sulli

3rd Cupra

vern

I Miss Her Below!

vern

I Miss Her Below!

Martyn

Si

Southern MoFo!

vern

I Miss Her Below!

Martyn

GaryM

Golf GTI 1.8T 180

m0rk

sarcasm comes free

Daz_gibbo

vern

I Miss Her Below!

Martyn

ibizacupra

Jack-RIP my little Friend

Martyn

Martyn

DPJ

...........

Martyn

ibizacupra

Jack-RIP my little Friend

Similar threads