MK4 Exhausts

STOCKY · Nov 24, 2005

Please post any useful info in this thread which will hopefully become sticky.

Include opinions if you have one and links to previous threads and prices and part numbers if needed

DO NOT POST CRAP IN THIS ONE IE DONT GO OFF TOPIC

Both Petrol and Diesel Please

This thread will be made Sticky if there is good feedback on it that will help people in the future

STOCKY · Nov 24, 2005

100PD Milltek Exhaust

Milltek do not list an exhaust for the 100PD but after soon research I found that it would fit no problem!

I have the milltek DP/sports cat from a Skoda Fabia Vrs you will also need the connecting pipe / by pass pipe!

Milltek have only recently released an Ibiza FR/Cupra version.

Milltek Part Numbers for the Skoda Fabia Vrs are

MSSKO3 Downpipe/Cat £259 plus VAT
MSSKO4 By-pipe pipe £36 plus VAT

My opinion of this so far after only having it for a few days are

Has made a big difference to my 100Pd and def does something! Cant comment on it yet but as I only had it fitted a few days

Things I have noticed so far it does rev alot easier and also improve torque I think IMO. also the turbo spools up quicker and makes an improved noise, almost like a whistle of sorts.

Let my dad take it out last night and asked him his opinion as then it wasnt me just thinking it. His comments were the same.

Cheapest I found was icjperformance.com

Tip for you. Order the Skoda parts

The FR and VRs DP and CAt are the same but the by pass pipe for each differs in price greatly.

Skoda by pass pipe £36
FR by pass pipe £150

Hope this helps someone

Triple D · Nov 25, 2005

I can also back you up stocky as the turbo spools up much quicker and even if you sit at idle and start lightly reving it you can hear the turbo whistle. Ive had the whole system done and its absolutly quality, makes so much difference in the way it picks up.
There are other manufacturers arround that do exhaust for the mk4 but as i have only seen and heard the milltek on both petrol and diesel i can only comment on them.

MCart · Nov 29, 2005

SEAT Sport Exahust

A photo of the SEAT Sport Exahust, its made by Super Sprint.

I have it installed in my Ibiza Sport 2.0

Triple D · Jan 16, 2006

Here's a pic of my exhaust. Its a Milltek turbo-back system with race cat and twin jet tail pipe's

kteino · Jan 31, 2006

As far as ibiza tdi is concerned, in Poland full 2,5 inch exhaust (starting just from turbocharger) are most popular, however some 2 inch exhaustes happen. No cat at all, single end muffler. However, if you consider a really bigger turbo in your beeza, some serious problems with the downpipe arise- an ABS steering module interferes with the proper exhaust's course.

Fez boy · Feb 22, 2006

Just to let you all know I had the Milltek fitted with the standard rear bumper

My car has the MS-Design body kit and I called Milltek to make sure it would fit,they told me if there was a cutout it will be fine!

I drove to Awsome (200 miles) and guess what......it did not fit

as my old exhaust had been cut off the only thing that could be done was for the end pipes(back box) to be cut and then fixed back on

So then it was off to blueflame for some custom pipework and now it's all sorted.

I will post some pics when I get back home(and clean the car)

mexicupra · Mar 10, 2006

what exhausts are there for the CUPRA 1.8t PETROL, and that look as good as the standard oval back box. Milltek's listings only have the FR so hence its a twin pipe finish.
I posted this here as i think that its relevant as there are people out there that have petrol cupras and not diesels.
Hope that someone can give a definate answer to this and not mention Milltek.

Ant FR · Mar 10, 2006

milltek?

Ant FR · Mar 10, 2006

i had mine from the FR on with my Cupra bumpers, needed extended a little.

When i spoke to milltek they said no problems

But honestly Milltek do one for the cupra , you just need to sepcify, best to phone them to order and speak Dave as he has already confirmed they make the FR one fit the cupra, the only difference is a slight extentsion by 1-2 inches on the tip to fit through the bumper.

Phone them though, don't rely on the website

oh no the FR is not a twin tailpipe finish, the first one they did and the pic on their website ( my old car) is the oval one

also if you don't want milltek, then best your car to an exhaust manufacturer to get em to design one, thats what i had to do when i wanted one for the FR

Fez boy · Mar 10, 2006

mexicupra said:
what exhausts are there for the CUPRA 1.8t PETROL, and that look as good as the standard oval back box. Milltek's listings only have the FR so hence its a twin pipe finish.
I posted this here as i think that its relevant as there are people out there that have petrol cupras and not diesels.
Hope that someone can give a definate answer to this and not mention Milltek.

You can get a custom system made from the likes of Top gear around £350 cat back

mexicupra · Mar 10, 2006

Thanks Ant fr and others, thats good information

Future_King · Mar 18, 2006

I've got 2003 1.4 16V sport.Which exhoust is best for my car?

after cat of course

Fez boy · Mar 19, 2006

Here are a couple of the Milltek fitted to my MK4 Ibiza TDi with the STANDARD BUMPER

Ric 2001 · Mar 19, 2006

Got told by Andy at Awesome that the Milltek will sit abit low on the cupra bumps. But like Ant FR says, you just need to specify that its being fitted to a cupra.

RichieRich · Apr 6, 2006

**NEWS FLASH** 1.4 16v drivers....

**NEWS FLASH** 1.4 16v drivers.... Peco now do a range for the 1.4 16v!! with 13 different styles! but only the 1.4 16v.... http://www.peco.co.uk/index.cfm?include=view_product_details&id=7406

Andywest2k1 · Apr 13, 2006

1.2 exhaust query

I own a 1.2 2005 ibiza and i'm thinking of sorting myself out with a new exhaust.

Exhausts UK is local to me but im not conivnced about their qaulity.

I was wondering what you lot thought would be my best option and prices etc.

Thanks in advance...

RichieRich · Apr 13, 2006

to be honest i havent seen any exhausts for the 1.2 at all really so i think u would have to get 1 specially made unless u can find a place that does do the exhaust for ur car mate,

MAdMAtt84 · Apr 22, 2006

Fez boy said:
Here are a couple of the Milltek fitted to my MK4 Ibiza TDi with the STANDARD BUMPER

My standard TDi bumper doesnt have that cut out....as with your car and the orange one i see that lower bit of plastic is shaped differently.

Do you have a part number? for that lower piece.

Thanks,
Matt

RichieRich · Apr 23, 2006

im suprised yours doesnt, its the fr rear valance i belive... if u phoned seat and said its the fr black bit under the rear bumper they'll know what ur on about (my local seat garage had no idea tho) lol or u could just get the rear body kit and that has that bit cut out.. but then again thats £200 ...

MK4 Exhausts

Audi TT 225

Audi TT 225

Triple D

Guest

MCart

Guest

Triple D

Guest

kteino

Guest

Full Member

Full Member

Full Member

Full Member

Full Member

Full Member

Future_King

Guest

Full Member

Need an ID-ten-T form

Mk4 Golf GT TDi

Full Member

Mk4 Golf GT TDi

Full Member

Mk4 Golf GT TDi

Similar threads