u orite lads jus wanna share my photos of how the car stands at the moment would have loved to do it step by step but didnt get chance to sorry.
Last edited:
-
Welcome to our new sponsor Lecatona, a brand dedicated to enhancing performance for VAG group sports cars, including SEAT, Audi, Volkswagen and Škoda. Specializing in High Pressure Fuel Pump (HPFP) upgrades.
400+ bhp gt2871r turbokit from backdraft motorsport all pipework custom built and tig welded SS
bdm stage 2 engine internal upgrade: forged pistons and con rods and so on
, siemens 630cc injectors with p&p adaptors
bdm high flow fuel pump with wiring harness
braided oil and water hoses
,s3 strut brace
front and rear anti roll bars
, ebc ultimax brake discs with ferodo ds2500 pads and ferodo dot 5.1 fluid
, mocal oil cooler
forge big race fmic
,peloquins atb diff,
helix clutch kit + lightened flywheel
, kw clubsports
, r32 interior
,top mount high flow cast manifold
SS oil drain bottom pipe
custom made downpipe and decat HEAT WRAPPED
custom made charge pipe and tip
.aem tru boost gauge and controller fitted in drivers side vent
, BDM baffled sump with protector plate and sensor
, forge 006 dv
revo stage 4
,ik24 spark plugs
virtual daylight hid kit
dv relocated to cold side
,full polybush kit
COMPLETE blue silicon hoses
pipercross inducction kit
diesel geek sigma 6 new version
vibratechnics engine mounts SET
fk wheel spacers rear
and finally the racing battery im sure theres more but i cant think.
. All thanx to the guys at backdraft motorsport for doing an awesome job on my car. recently added
braided brake lines
blueflame cat back and got downpipe ceramic coated
oil catch tank custom made
aem water/meth injection
.sem mani
rs4 maf
wot box
racelogic traction control system
and got my head ported along with retainers and all valves and seals. EDIT: BODYWORK LOOKS HORRIBLE NOW SO GOT TO FIX THIS.ALLOYS, NEW BUMPER,SPLITTER,GRILLS,BASICALLY EVERYTHING OUTSIDE THE ENGINE NEEDS DOING.THIS IS MY NEXT TASK. (BODYWORK)
bdm stage 2 engine internal upgrade: forged pistons and con rods and so on
, siemens 630cc injectors with p&p adaptors
bdm high flow fuel pump with wiring harness
braided oil and water hoses
,s3 strut brace
front and rear anti roll bars
, ebc ultimax brake discs with ferodo ds2500 pads and ferodo dot 5.1 fluid
, mocal oil cooler
forge big race fmic
,peloquins atb diff,
helix clutch kit + lightened flywheel
, kw clubsports
, r32 interior
,top mount high flow cast manifold
SS oil drain bottom pipe
custom made downpipe and decat HEAT WRAPPED
custom made charge pipe and tip
.aem tru boost gauge and controller fitted in drivers side vent
, BDM baffled sump with protector plate and sensor
, forge 006 dv
revo stage 4
,ik24 spark plugs
virtual daylight hid kit
dv relocated to cold side
,full polybush kit
COMPLETE blue silicon hoses
pipercross inducction kit
diesel geek sigma 6 new version
vibratechnics engine mounts SET
fk wheel spacers rear
and finally the racing battery im sure theres more but i cant think.
. All thanx to the guys at backdraft motorsport for doing an awesome job on my car. recently added
braided brake lines
blueflame cat back and got downpipe ceramic coated
oil catch tank custom made
aem water/meth injection
.sem mani
rs4 maf
wot box
racelogic traction control system
and got my head ported along with retainers and all valves and seals. EDIT: BODYWORK LOOKS HORRIBLE NOW SO GOT TO FIX THIS.ALLOYS, NEW BUMPER,SPLITTER,GRILLS,BASICALLY EVERYTHING OUTSIDE THE ENGINE NEEDS DOING.THIS IS MY NEXT TASK. (BODYWORK)
Last edited:
thanx guys your comments are appreciated. more photos are comin soon. only got the car back yesterday not even on full boost yet. still runnin it in. tomorrow should be full race ready lol.
Last edited:
yep i wanna keep it as standard as i can from the outside. its the inside that counts hey.
deano82
Guest
Alrite mate, I was drooling over your car and all them mods yesterday !
I popped into Backdraft yesterday and they had your car (or very similar) just being finished. It was about 4.30ish, Was that yours ?
Similar threads
