what have you done to your car today ?

Dazzalcr

Active Member
Aug 10, 2019
302
284
Lancashire
Just washed car, it needs a detail inside an out really but it's nearly done 😆
 

Attachments

  • 20220420_110034.jpg
    20220420_110034.jpg
    701.8 KB · Views: 76
  • 20220420_105726.jpg
    20220420_105726.jpg
    750.1 KB · Views: 77
  • 20220420_105650.jpg
    20220420_105650.jpg
    1 MB · Views: 81
  • Screenshot_20220420-115202_Gallery.jpg
    Screenshot_20220420-115202_Gallery.jpg
    380.2 KB · Views: 67

MoToJoJo

Active Member
Mar 25, 2014
823
653
Northants
Spent far too long chasing up part numbers and seeing what wonders the Leon Supercopa had. Strangely enough, the stock washer bottle was used as the catch tank for the oil and for actual windscreen washer duties they got the bottle from a mid 80s Scirocco.

Oh, and I found a price list of lots of Supercopa parts at a place in Germany… anyone speak German n wanna ask them some silly questions?
 
  • Like
Reactions: Alexis27

Manic172

https://m.facebook.com/ManicMotorsport1
Dec 4, 2018
1,349
1,401
Hemel hempstead
www.seatcupra.net
Delivered today... my titainium exhaust stud kit.
16505710023486727724291842845848.jpg

12 pointed heat treated nuts. They are just stunning. Massive thank you to ERC for them.
16505710122105907394755204700427.jpg
the wahers again are titainium heatreaded but the finish and machineing is superb.
16505710232608491063669035709104.jpg
the studs again are an amazing finish to the treads and the hex in the end .
16505710385236975062923419942594.jpg
please enjoy responsible
 
Last edited:

Manic172

https://m.facebook.com/ManicMotorsport1
Dec 4, 2018
1,349
1,401
Hemel hempstead
www.seatcupra.net
Next up is an 034 motorsport rear main seal and housing . This was a "want" rather than a need
16505712869694244112248303917264.jpg
16505713040408534653302109948043.jpg
16505713206556943683229860332502.jpg

The machining is second to none. As always from 034 motorsport. The anodising is also top notch.. that's just dodgy camera and no skilld in photography .
 
  • Like
Reactions: Rich.T

Thai-wronghorse

Self proclaimed Cupra R addict & butcher!
Dec 3, 2015
2,240
1,093
Kent
I have some very similar turbo studs that I bought from Mamba, they were flipping expensive but they're sooo much better quality than the stock ones and a lot easier to use as they allow a small 11mm ratchet spanner to fit onto the nut rather than struggling like hell with a cumbersome 17mm in a tiny space.

Sent from my SM-G986B using Tapatalk
 

iammooks

Active Member
Nov 27, 2018
1,784
1,172
Nobody will ever see them (unless you *really* run out of talent) but you'll know they're there, and that's what makes you smile.


Sent from my iPad using Tapatalk
 
  • Like
Reactions: Manic172

Alexis27

Active Member
Dec 20, 2009
2,145
479
Manchester


Removed the roof rails so I can re-lacquer them over the weekend. Got the gunk out, but need to slap some anti-rust primer on becahse there are a few patches of surface rust
 
  • Like
Reactions: iammooks

iammooks

Active Member
Nov 27, 2018
1,784
1,172


Removed the roof rails so I can re-lacquer them over the weekend. Got the gunk out, but need to slap some anti-rust primer on becahse there are a few patches of surface rust

I should do that, as I've got a light scuff on my roof I want to sort while I have the 2K lacquer out.

Was it a straightforward job?


Sent from my iPhone using Tapatalk
 

Alexis27

Active Member
Dec 20, 2009
2,145
479
Manchester
Yeah, dead easy to get them off. Sprayed WD40 along them and then prised them off from the rear with a plastic knife. Once the rear is up you can pull them up and off by hand.
 
  • Like
Reactions: iammooks

Nam-uk

Active Member
May 11, 2011
1,177
351
lancashire.


Removed the roof rails so I can re-lacquer them over the weekend. Got the gunk out, but need to slap some anti-rust primer on because there are a few patches of surface rust
on top of the anti rust chemical I've put on i used a zinc spray its very good anti rust, painted it on though after spraying lid, Aldi do really good zinc sprays for the price even as good as Action can ZG-90, then just used the matched paint I've got that does not need a Lacquer, did mine last year as the rust come above the rails , exact same place on both sides, completely forgot as its a common problem the audi S3 mk1 had same issue

 
Last edited:
  • Like
Reactions: iammooks

Nam-uk

Active Member
May 11, 2011
1,177
351
lancashire.
I should do that, as I've got a light scuff on my roof I want to sort while I have the 2K lacquer out.

Was it a straightforward job?


Sent from my iPhone using Tapatalk
watch the rails don't bend as the rubber sticks too body but there easy straightened you just don't want a kink, cleaned them also as certain points hold dirt once paint dry i sprayed silicon spray on the rubbers and fit back
 
  • Like
Reactions: iammooks

Dazzalcr

Active Member
Aug 10, 2019
302
284
Lancashire


Removed the roof rails so I can re-lacquer them over the weekend. Got the gunk out, but need to slap some anti-rust primer on becahse there are a few patches of surface rust
This is a job for mine at one point, just picked up a very firm set to replace mine, as a few years ago the garage did not take them out to paint them properly and now the rails are flaking wouldn't av been a big deal except they sealed the ends in I defo expect them to break to get them out
 
  • Like
Reactions: iammooks

g60stu

Full Member
Feb 9, 2003
438
338
Reading
Spent far too long chasing up part numbers and seeing what wonders the Leon Supercopa had. Strangely enough, the stock washer bottle was used as the catch tank for the oil and for actual windscreen washer duties they got the bottle from a mid 80s Scirocco.

Oh, and I found a price list of lots of Supercopa parts at a place in Germany… anyone speak German n wanna ask them some silly questions?
Did you see that PDF doc that someone stuck on one of the Facebook groups??
It was called “2005 SEAT Sport UK Parts Manual”. 162 pages. I have a copy if you haven’t seen it. Might be useful.
 
Chris Knott Insurance - Competitive quotes for forum members