OEM 19" wheels in a different colour

stugee106

Active Member
Jul 2, 2021
21
27
Hi,

I'm getting the cupra wheels refurbed and contemplating getting rid of the diamond cut and going for a single colour.

Has anyone powder coated the wheels and have you got any pics? Can't decide if the wheels will suit bronze or anthracite!

markup_9463.png


Cheers Stuart
 

black_sheep

Active Member
Mar 10, 2013
1,255
587
I went gloss black after the lacquer started to peel on a couple of my wheels - they look far better than I was expecting.
 

Attachments

  • 9B24B58B-7B22-408E-9681-15D0987707F5.jpeg
    9B24B58B-7B22-408E-9681-15D0987707F5.jpeg
    311.7 KB · Views: 381

Gaz9000

Active Member
Oct 14, 2021
34
20
These are the wheels on my new Cupra - weren't ordered by me but I love them and polished faces have no appeal to me either.

I guess anthracite covers a wide spectrum of greys. These are definitely a lighter shade of grey than some I've had/seen. Or maybe the spoke thickness and angles just fool my eyes a bit.

Whats the going rate for powder coating nowadays? Used to be £60 a corner last time I got quoted.
 

Attachments

  • 20220119_084648.jpg
    20220119_084648.jpg
    384.4 KB · Views: 274
  • 20220119_084704.jpg
    20220119_084704.jpg
    429.2 KB · Views: 332

stugee106

Active Member
Jul 2, 2021
21
27
Think I've decided on shadow chrome. I pre-booked a black Friday deal and I'm getting them done for £200. Prices seem to range from £200 to £300 a set depending on colour.
Screenshot_20220119-094218.png
 
  • Like
Reactions: SRGTD and Gaz9000

SRGTD

Active Member
May 26, 2014
2,559
1,403
Think I've decided on shadow chrome. I pre-booked a black Friday deal and I'm getting them done for £200. Prices seem to range from £200 to £300 a set depending on colour.

Good choice 👍. Be sure to post up a picture with the wheels on the car when you've had them done 🙂.
 

RUM4MO

Active Member
Jun 4, 2008
7,967
1,059
South Scotland
Seeing as this question has been asked, I'll butt in and ask the same question!

I need to get my winter alloys refurbed in the spring mainly due to them leaking at the valve holes, caused no doubt by Costco finding that they needed to clear away some of the powder coating when initially fitting winter tyres to them many years ago.

So, while I agree with the suggestions given for the body colours shown, my Audi S4 is Deep Sea Blue Pearl - that means, it looks black when the sun is not out, and a very pleasant dark blue pearl when the sun is out, so my question is, Anthracite or Black?

Thanks!
 

SRGTD

Active Member
May 26, 2014
2,559
1,403
If your car looks black in certain lighting conditions, I would go for a colour that looks a shade or two lighter (than black) to give a bit of colour contrast between the wheels and car colour. IMHO black alloys on a blue/black car would be too much black, and with black alloys you tend to lose the design detail of the alloys, unless you’re standing very close to the car.

I think that mid or lighter shade of anthracite grey would look good. Alternatively, I think shadow chrome in the picture posted by @stugee106 in post #6 looks very good.
 
  • Like
Reactions: RUM4MO

black_sheep

Active Member
Mar 10, 2013
1,255
587
Forgot, but also have some pics of our old white FR with gloss black 18” Performance alloys:
 

Attachments

  • 12C69E3D-6859-4187-88BD-B4A93180906C.jpeg
    12C69E3D-6859-4187-88BD-B4A93180906C.jpeg
    570.2 KB · Views: 341
  • 5D6B9DE1-4128-4C86-8667-8EA20B23195E.jpeg
    5D6B9DE1-4128-4C86-8667-8EA20B23195E.jpeg
    436.9 KB · Views: 251

RUM4MO

Active Member
Jun 4, 2008
7,967
1,059
South Scotland
If your car looks black in certain lighting conditions, I would go for a colour that looks a shade or two lighter (than black) to give a bit of colour contrast between the wheels and car colour. IMHO black alloys on a blue/black car would be too much black, and with black alloys you tend to lose the design detail of the alloys, unless you’re standing very close to the car.

I think that mid or lighter shade of anthracite grey would look good. Alternatively, I think shadow chrome in the picture posted by @stugee106 in post #6 looks very good.

Thanks, that was my thinking way of thinking, though maybe I'll leave out the shadow chrome only for the reason that any scuffing might be easier to "cover up/hide" if they were Anthracite.
 

SRGTD

Active Member
May 26, 2014
2,559
1,403
Wheels back and look better than I expected.
View attachment 29853

They look brilliant and IMHO should have been the way they came from the factory 😎.

Much more durable than the original diamond cut finish, and no issues with white worm corrosion. Will look great on your white Cupra - please post up a picture when they’re back on the car.
 
  • Like
Reactions: stugee106

BigJase88

Jase
Apr 20, 2008
3,767
1,076
Look nice

Look chunkier and more emphasis on spoke design as the gloss black hides the detail
 

Wilto

Active Member
Mar 5, 2021
128
60
58
South Wales
Wheels back and look better than I expected.
View attachment 29853
Very very nice,
I hate solid black alloys, they have always reminded my of a car that has steel wheels with the covers missing 😂
I have the 18' performance alloys in black BUT with the machined finish.
If and when I decided to upgrade to 19's this is the colour I would love to have.