-
Hey Guest one of our sponsors Progressive Parts is running Black Friday and Cyber Monday offers - more details here
AndrewJB's daily MK1 Leon FR+ TDI
- Thread starter AndrewJB
- Start date
Images speak for themselves, need to get the red stripe done again now probably with leather paint.
So you can use these and there'll be no tackyness? Thinking of doing all red bits blue
Something I have been meaning to do for ages.
eBay specials for about £15 so how they hold up.
eBay specials for about £15 so how they hold up.
So yesterday did break fluid change
Unfortunately while doing that found out that the LCR wheels had been touching the suspension, well the tyres had.
So got to fit 5mm spacers and also need 2x new tyres!
Anyway on to todays job! bloody passenger door module worked when it wanted
door card off and the offending item replaced with a new one
Took about 45 mins in total.
Unfortunately while doing that found out that the LCR wheels had been touching the suspension, well the tyres had.
So got to fit 5mm spacers and also need 2x new tyres!
Anyway on to todays job! bloody passenger door module worked when it wanted
door card off and the offending item replaced with a new one
Took about 45 mins in total.
MOT has now run out as the tyre place didn't have the tyres in place and also the 5mm spacers were too big. Tyre fitter is coming today and have some better 5mm spacers ready!
While waiting decided to try and fix injector #4 issue which is reading +2.99 all the time instead of moving around like the rest
Unfortunately I cleaned the contacts like in a few videos but it doesn't appear to have worked so think a new injector is required, but the car still runs spot on anyway so not to worried about it.
Hoping the current brakes will get through the MOT but if not I have some 312mm carriers ready for upgrade
Thought I better get them ready for install
Will give them a lick of red today.
While waiting decided to try and fix injector #4 issue which is reading +2.99 all the time instead of moving around like the rest
Unfortunately I cleaned the contacts like in a few videos but it doesn't appear to have worked so think a new injector is required, but the car still runs spot on anyway so not to worried about it.
Hoping the current brakes will get through the MOT but if not I have some 312mm carriers ready for upgrade
Thought I better get them ready for install
Will give them a lick of red today.
Last edited:
MOT 11am, black circles mobile fitter has just left, new tyres bulge more than old ones so even with 5mm spacers fitted its close. Get it through its MOT and will take it to get alignment done and put new tyres on the rear (apparently he couldnt do this as I hadn't requested it through blackcircles)
Here's the state of the tyres
Injector #4 is no longer sitting at +2.99 either
Here's the state of the tyres
Injector #4 is no longer sitting at +2.99 either
Similar threads
