what did you and your mk3 leon do today

[JsyCuPrA]

Car had a visit to Dialynx Performance, as my stock clutch was slipping on Revo stage one, so car now has a SACH Performance clutch and also Revo Stage one was upgrade to the higher torque map.

 

[ukoldschool]

The estate is fugly too.

all estates are fugly

 

[zedlor]

Just put the spray washers on as well...2nd time lucky, first ones I bought weren't VW ones and didn't spray at all...

 

[Pew.]

 

[Lmbarrett83]

Finally got around to getting my wheel replaced under warranty.

Sent from my Pixel XL using Tapatalk

 

[Semtax]

Tracking done, new plugs step colder IKH24 filled up the tank quick Hoover and tyre pressure check.

Countdown is on 6 more sleeps until my first track day. Prep almost done.

http://imgur.com/gallery/G4i0POd

Pretty sure I saw you at Mondello earlier. I was going for the afternoon session. How did it go for you?

 

[Damo H]

all estates are fugly

 

[Pew.]

Revo intake installed

 

[Pew.]

After a moment of idiocy and discussion with the old boy on here I learnt to read instructions properly! Couldn't get the OEM intaki installed back on above the radiator, simple mistake of connecting a bracket 5mm to the right of where it should have been. Now fully rebuilt

 

[Jay280]

Went down to the awesome gti summer bash and took advantage of the sale offers

Sent from my SM-G950F using Tapatalk

 

[Maypack]

Averaged 42.2mpg on my 20 mile commute to work in my Cupra 300. Checked the Ecotrainer and I had scored 97 out of 100.

No way I’ll have that mpg on the way home in the morning. More like 25-29mpg then and I daren’t even look at the Ecotrainer!!


Sent from my iPhone using Tapatalk

 

[kiddo]

Updated maps to v1030, altered throttle response to linear or whatever the opposite of factory setting is (I got fed up with jerky starts in dsg) and stopped cupra button lighting up when in cupra mode.

 

[Deleted member 103408]

kiddo have you tried changed the throttle settings to Audi to see if that makes any difference.

http://forum.obdeleven.com/thread/3991/throttle-pedal-reponse

 

[Maypack]

altered throttle response to linear or whatever the opposite of factory setting is (I got fed up with jerky starts in dsg)

What’s the coding to do this? And does it make any real noticeable difference?


Sent from my iPhone using Tapatalk

 

[Deleted member 103408]

Update Audi coding is

Select Control unit 01- Engine
Select Long Coding (1)
Select Byte 0,
Change Bit 0-2 from Seat to AUDI (02)

this will reduce lag on pressing accelerator pedal.

Not tried it so don't know, that is why I was asking.

Some commentators say on the lower level models it makes a big difference others say it impacts all.

 

[Maypack]

Not tried it so don't know, that is why I was asking.

I’ll try that in the morning when I get home and let you know if there is any difference.


Sent from my iPhone using Tapatalk

 

[Deleted member 103408]

if you go here
and from the index select the last item (12/ Performance changes non engine) this will show you all the coding for items that apparently make the car handle / respond better.

The change that kiddo made is in there as well.

 

[JsyCuPrA]

Update Audi coding is

Select Control unit 01- Engine
Select Long Coding (1)
Select Byte 0,
Change Bit 0-2 from Seat to AUDI (02)

this will reduce lag on pressing accelerator pedal.

Not tried it so don't know, that is why I was asking.

Some commentators say on the lower level models it makes a big difference others say it impacts all.

Change mine last week, but soon changed it back as it stopped the cruise control working.

 

[kiddo]

I haven't had chance to give the direct acceleration - throttle response change a decent test yet. I haven't tried the Audi engine response but will give it a try if anyone reports a positive experience of the change.

 

[Deleted member 103408]

Thanks I will also try it in the morning and see if I get cruise control issues, @JsyCuPrA is your car facelift or pre facelift