-
Hey Guest one of our sponsors Progressive Parts is running Black Friday and Cyber Monday offers - more details here
What did you and your MK2 do today?
- Thread starter Tfsi_Mike
- Start date
Had the buckled front wheel swapped to the back, replaced the worn boot handle, went to Homebase! #livingthedream
Had a rubbish day lol fitted the front splitter only to find one of the clamps had moved somewhere so it sticks out by 2cm more on one side near the wheel...
It's was also a
to fit as they leave no room for hands to put a tiny washer and nut on a small screw lol so maybe have to re seat that at some point...
Then to top things off went to change the low range horn only to find that the front light washer jet thing is leaking on the horn...
Bad day today. .. Bad day
It's was also a
to fit as they leave no room for hands to put a tiny washer and nut on a small screw lol so maybe have to re seat that at some point...Then to top things off went to change the low range horn only to find that the front light washer jet thing is leaking on the horn...
Bad day today. .. Bad day
Looking for around 9k with all the mods on, I've had the car four and a half years and it's been well maintained throughout. Had another mk2 Cupra for three years before that so definitely time for a change
Had the car sold for 24 hours.
Call me this morning saying, sorry but I can’t get the rest of the money.
Why people don’t stick to their word?
Didn’t take any deposit because I trust this guy but I was wrong.
Lesson learned.
Right let’s watch the Grand Prix, to take things out of my mind.
Sent from my iPhone using Tapatalk
Call me this morning saying, sorry but I can’t get the rest of the money.
Why people don’t stick to their word?
Didn’t take any deposit because I trust this guy but I was wrong.
Lesson learned.
Right let’s watch the Grand Prix, to take things out of my mind.
Sent from my iPhone using Tapatalk
Used a Dremel and some WD-40 to sort the issue of the front left door not unlocking on remote in 2 years ![[B)]](/forums/styles/seatcupra/oldforumsmileys/shades.gif "Cool [B)]")
It would lock fine but could only be unlocked by opening from the inside. No new parts needed
Need to sort the near side rear door next as that locks on remote but not unlock on remote.
It would lock fine but could only be unlocked by opening from the inside. No new parts needed
Need to sort the near side rear door next as that locks on remote but not unlock on remote.
Done all 4 of my doors lol crap design!Used a Dremel and some WD-40 to sort the issue of the front left door not unlocking on remote in 2 years
It would lock fine but could only be unlocked by opening from the inside. No new parts needed
Need to sort the near side rear door next as that locks on remote but not unlock on remote.
Used a dust cap from a fibre patch cable to plug the hole after, perfect size for the 3mm hole in the housing.
Last edited:
got my car booked in for an A/C recharge and Anti Bacterial clean for £38 at ATS with a deal from Groupon
Got a load of parts for sale from my car if anyone is interested lol
GFB DV+
H&R spacers (10mm and 15mm sets)
BCS full turbo-back exhaust
Evoms intake
MTC silicone DV return hose
GFB DV+
H&R spacers (10mm and 15mm sets)
BCS full turbo-back exhaust
Evoms intake
MTC silicone DV return hose
Yes mate with correct length radius bolts, looking for £95 posted for both sets
Detailed the ole girl! It’s never seen paint renovator or wax before and it’s come out the best I’ve seen it yet.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Wowzers! That looks shiny! How long did that take you?
About 4 hours! Washed with soap, rinsed, applied paint restorer, polished, waxed.
Sent from my iPhone using Tapatalk
Similar threads
