New Car Detail - Mystery Blue Mk3 SEAT Leon Cupra 300 5 Door

Bristle Hound

Moderator
Aug 21, 2017
147
48
North East Uk
I asked the Dealer to the leave the car 'as is' other than to remove all the transport film, which is part of the PDI, which they did
My car was filthy ! It was covered in a layer of muck with adhesive all over the place

As collected -

nXAZ4r7l.jpg


ffs0vH6l.jpg


I did find a little marring on the bonnet & ROS door which were easy enough to remove

Thought I would try some 'old school' products on this Detail. I've used these before on one of my cars but it was some time ago TBH

All the remaining transport film/plastic seat coverings removed from the exterior and interior

KAFP9gZl.jpg


Detail as done -

Strong pre-wash with ValetPro Citrus Pre-Wash
2 bucket wash with lambswool mitt & a strong mix G3 Detox shampoo
Wheel arches cleaned with APC
Paintwork decontaminated with CP Iron-X
All the wheels decontaminated with Iron-X
Coat of Dodo Juice Lime Prime applied with a MF pad as a pre-wax cleanser
Coat of Chemical Guys Blacklight applied a MF pad
2 x coats of Chemical Guys Hybrid V07 applied with short MF & buffed off with a plush MF
2 x coats of Planet Polish wheel seal and shine applied to the wheels
Tyres dressed with Meguairs endurance tyre gel
Exhaust tips cleaned and sealed with Britemax twins
Door & boot shuts treated with Chemical Guys Hybrid V07
Under bonnet cleaned with APC then all the plastics treated with Gtechniq C2V3
Interior surfaces cleaned with a mild APC
Interior glass cleaned with CP Eraser
Interior mats treated with Gtechniq I1 V2
Exterior glass cleaned with AG glass polish, then CP Eraser then 2 x coats of Angelwax H2GO rain repellent applied to windscreen & rear window & 1 coat to the remaining exterior glass


As usual, no 'in progress' pic's

4wnLhOnl.jpg


A9ZqMa7l.jpg


6SYTCgRl.jpg


flOb1KWl.jpg


rFa03kbl.jpg


NgPVoHhl.jpg


SDB9CmJl.jpg


4V9JBIBl.jpg


ghwU79Cl.jpg


yl2oGz5l.jpg


aMnYFxrl.jpg


mcVOGBhl.jpg


xdUISrDl.jpg


pwei4CBl.jpg


None of the above photo's have been edited

Thanks for looking
 
  • Like
Reactions: davidstarkey11

Cupra_Jay_300

Now: Magnetic Grey 290 LUX. Then: Nevada White 300
Jan 25, 2018
74
40
Superb colour and a great first detail dude! I am chomping at the bit to get to work on mine after collecting Saturday. Unfortunately the weather had different ideas. Roll on Sunday!
 
Last edited:
  • Like
Reactions: Bristle Hound

hepstar7

Active Member
Oct 6, 2017
111
9
I asked the Dealer to the leave the car 'as is' other than to remove all the transport film, which is part of the PDI, which they did

My car was filthy ! It was covered in a layer of muck with adhesive all over the place



As collected -



nXAZ4r7l.jpg




ffs0vH6l.jpg




I did find a little marring on the bonnet & ROS door which were easy enough to remove



Thought I would try some 'old school' products on this Detail. I've used these before on one of my cars but it was some time ago TBH



All the remaining transport film/plastic seat coverings removed from the exterior and interior



KAFP9gZl.jpg




Detail as done -



Strong pre-wash with ValetPro Citrus Pre-Wash

2 bucket wash with lambswool mitt & a strong mix G3 Detox shampoo

Wheel arches cleaned with APC

Paintwork decontaminated with CP Iron-X

All the wheels decontaminated with Iron-X

Coat of Dodo Juice Lime Prime applied with a MF pad as a pre-wax cleanser

Coat of Chemical Guys Blacklight applied a MF pad

2 x coats of Chemical Guys Hybrid V07 applied with short MF & buffed off with a plush MF

2 x coats of Planet Polish wheel seal and shine applied to the wheels

Tyres dressed with Meguairs endurance tyre gel

Exhaust tips cleaned and sealed with Britemax twins

Door & boot shuts treated with Chemical Guys Hybrid V07

Under bonnet cleaned with APC then all the plastics treated with Gtechniq C2V3

Interior surfaces cleaned with a mild APC

Interior glass cleaned with CP Eraser

Interior mats treated with Gtechniq I1 V2

Exterior glass cleaned with AG glass polish, then CP Eraser then 2 x coats of Angelwax H2GO rain repellent applied to windscreen & rear window & 1 coat to the remaining exterior glass




As usual, no 'in progress' pic's



4wnLhOnl.jpg




A9ZqMa7l.jpg




6SYTCgRl.jpg




flOb1KWl.jpg




rFa03kbl.jpg




NgPVoHhl.jpg




SDB9CmJl.jpg




4V9JBIBl.jpg




ghwU79Cl.jpg




yl2oGz5l.jpg




aMnYFxrl.jpg




mcVOGBhl.jpg




xdUISrDl.jpg




pwei4CBl.jpg




None of the above photo's have been edited



Thanks for looking



Looks amazing! Simple question: is the britemax twins the recommended product to clean exhaust tips? If so where should I buy it and how do I apply it for best results?


Sent from my iPhone using Tapatalk
 
  • Like
Reactions: Bristle Hound

Bristle Hound

Moderator
Aug 21, 2017
147
48
North East Uk
Looks amazing! Simple question: is the britemax twins the recommended product to clean exhaust tips? If so where should I buy it and how do I apply it for best results?
Thanks!
I was a big fan of Solvol Autosol before I found Britemax twins, which TBH, I find a much better product
Any plans brother or is it staying as is?
Cupra's staying as is mate
Apart from a LED reversing light upgrade lol
 
Adrian Flux insurance services - discount for forum members.