Lime Green Cupra K1 - Hybrid turbo

Leeoncupra

Active Member
Feb 12, 2017
764
191
Halesowen
I'm having a. Nightmare with the pipes from the intercooler , I had it all fitted then it popped off when driving , the pipes from turbo revs don't fit as they are too long for the leon , has some custom ones made all sorted now
Was the turbo revs hose too short or long? Iv got both the turbo rev and the darkside hoses

The darkside hose is longer than the turbo revs 90 degree but the other hose is the same size

Recon one of then will fit ok?

(Darkside hoses have the clamps on)
a9c982e3db96523ec1c760c2c65376e9.jpg


forged engine,revo intake,3" TBE r tech stage 2 -323bhp 333ftlb build thead: http://www.seatcupra.net/forums/showthread.php?t=440348
 

RyanC93

Active Member
Dec 19, 2014
313
23
South Shields, Newcastle
Yes they look the right ones , that’s definetely the clamps you want , but I had such oversize hoses that the hose was basically touching the side of the oil pan and couldn’t get. A t bolt clamp in so I used 2 skinnier jubilees;)
 
Last edited:

Leeoncupra

Active Member
Feb 12, 2017
764
191
Halesowen
Yes they look the right ones , that’s definetely the clamps you want , but I had such oversize hoses that the hose was basically touching the side of the oil pan and couldn’t get. A t bolt clamp in so I used 2 skinnier jubilees;)
Happy days

95quid just for the hoses so i hope they fit properly

forged engine,revo intake,3" TBE r tech stage 2 -323bhp 333ftlb build thead: http://www.seatcupra.net/forums/showthread.php?t=440348
 

RyanC93

Active Member
Dec 19, 2014
313
23
South Shields, Newcastle
Well i have just ordered new some cold gapped spark plugs designed for stage 2+, new R8 coil packs , and a red ignition harness , also getting. New set off Michelin pilot super sport tyres :)

I am getting tempted on water meth injection and also a forge hose kit for the engine bay!
 
Last edited:

RyanC93

Active Member
Dec 19, 2014
313
23
South Shields, Newcastle
Well the parts are on the car and the car feels great now , I swear it feels more “pokey” , I’m not sure if it is the placebo effect or my coils weren’t the best, the cold racing spark plug makes the car bang like a shot gun every gear change , sounds the dogs bollocks

2rwneyd.jpg


i6jvao.jpg
 
Last edited:

RyanC93

Active Member
Dec 19, 2014
313
23
South Shields, Newcastle
Well I’ve fitted the shirt shifter today and it is one of my favourite mods to do date. Well worth £35 , don’t know why I didn’t get one sooner!
 
Last edited:

RyanC93

Active Member
Dec 19, 2014
313
23
South Shields, Newcastle
No mate bolts straight in, the cooler isn’t hard to fit once you get the stuff , don’t know why people are saying there bad , pure madness , nicky at r tech would of told me if so ...

My mate at work has a stage 3 focus st 2008 with a similar intercooler off eBay and preforms more then we’ll enough ..
 
Last edited:

Leeoncupra

Active Member
Feb 12, 2017
764
191
Halesowen
No mate bolts straight in, the cooler isn’t hard to fit once you get the stuff , don’t know why people are saying there bad , pure madness , nicky at r tech would of told me if so ...

My mate at work has a stage 3 focus st 2008 with a similar intercooler off eBay and preforms more then we’ll enough ..
Did you tell him it was a china cooler?

forged engine,revo intake,3" TBE r tech stage 2 -323bhp 333ftlb build thead: http://www.seatcupra.net/forums/showthread.php?t=440348
 

RyanC93

Active Member
Dec 19, 2014
313
23
South Shields, Newcastle
My maw at work actually bought one similar before me and told me that’s why I Decided to get that one .. a lot of people saying they’re bad and this and that but I haven’t seen any proof so, Nicky at r tech didn’t even ask about the intercooler! If it was bad I’m
Sure he would of
 
Last edited:

Leeoncupra

Active Member
Feb 12, 2017
764
191
Halesowen
He actually bought it before me and told me that’s why I Decided to get that one .. a lot of people saying they’re bad and this and that but I haven’t seen any proof so, Nicky at r tech didn’t even ask about the intercooler! If it was bad I’m
Sure he would of
Sorry i meant rtech mate , im only joking though

Btw how much was your uprated clutch?

forged engine,revo intake,3" TBE r tech stage 2 -323bhp 333ftlb build thead: http://www.seatcupra.net/forums/showthread.php?t=440348
 
Last edited:

RyanC93

Active Member
Dec 19, 2014
313
23
South Shields, Newcastle
Lol .. I wouldn’t be spending anymore on a intercooler if I was you personally , madness if you do! Nicky at r tech would of asked me if it had restrictions , just get them oversized hoses what I told you about ..And about £1,000 I got full kit from clutch stop , Sachs sintered clutch rated 450 foot pounds , single mass fly wheel, new slave cylinder and release bearing I think, mind the clutch is quite bad for daily driving , hurts my leg in traffic ! , if I done it again i would of stuck a lsd in there when the box was off
 
Last edited:

RyanC93

Active Member
Dec 19, 2014
313
23
South Shields, Newcastle
Well I’ve just fitted the super bush dog bone mount then had a quick drive to work haven’t really tested it out , no extra vibrations , probably due to already having a revo engine and gear box mount already in , but over all impression it helps put the power down

2klxea.jpg
 
Last edited:

RyanC93

Active Member
Dec 19, 2014
313
23
South Shields, Newcastle
Well not a lot going on but I have taking my air filter off and giving it a good clean , hasn’t been done in 30,000 miles , also just order 6L of Mobil 1 oil, 3 litres of gear box oil, and forte specialist injector cleaner and 3 litres of ate blue brake fluid , car should be like new once all done

33f9ljn.jpg


becz88.jpg
 

Legojon

I only wanted a remap
Staff member
Moderator
Jul 7, 2015
5,311
2,741
Well not a lot going on but I have taking my air filter off and giving it a good clean , hasn’t been done in 30,000 miles

I'm going to be doing my full service myself this year for the first time eek. What did you clean the air filter with? Did you have to oil it or anything before putting it back on?

Also... don't suppose you have a link to those sparkplugs? I might give em a try.

I had a shortshifter on my FR, but could never get used to it. I think when changing gears quickly I was too slow on the clutch. So just ended up crunching the gears most of the time. I was tempted to try a short shifter with a sportsshifter knob (with less of a throw) and see how that worked out tho.
 
Genuine SEAT Parts and Accessories.