What did you and your MK2 do today?

Jul 6, 2013
528
0
West Yorkshire
So me and the mk2 decided to collide with this in the outside lane of the motorway...
72dc9b4c789c922130c919bab921b29a.jpg


Which resulted in this...
e9cbb237d5bb9fa35f88233c4dba091d.jpg


Smashed the under tray and NSF wheel arch liner. Also snapped the metal clip off the CV boot. God knows how it didn't do any more damage as when I pulled over on the motorway I had to rag it out of the underneath of the car. Very annoying however lucky as it could have been a lot worse.

5 minutes after we collided they closed the motorway and shifted the remaining 4 parts of metal on the motorway. Emailed highways agency see if I can get any money back off them but I doubt it.


Sent from my iPhone using Tapatalk

Christ :wtf: glad you're ok, and there's not too much damage. Where was this? M62?
 

olitaylor07

Badger Badger
Jul 15, 2012
2,417
1
West Yorkshire
Bl00dy hell. Lucky it didn't flick up and hit windscreen , bad enough though. Looks like parts of a temporary road sign.


Yeah I think that too looks like the top and side section. Sounded awful when we went over it, massive bang and a scraping sound.


Sent from my iPhone using Tapatalk
 

olitaylor07

Badger Badger
Jul 15, 2012
2,417
1
West Yorkshire
Christ :wtf: glad you're ok, and there's not too much damage. Where was this? M62?


Yeah damage could have been a lot worse. Don't know how it didn't to be honest. Yeah eastbound between 26 M606 and 27 Birstall.

Could be worse could of frazzled my piston ;)


Sent from my iPhone using Tapatalk
 
Last edited:

Matt cla

Active Member
Jul 9, 2014
114
0
Nottingham
Was going to fit my sportline springs today but unfortunately didn't make it past the drivers side!
All the bolts around the hub and strut were well and truly seized. Wouldn't budge with power tools or even with a length of scaffold as a lever. Looks like they'll need hitting with a torch to heat them up. Anyone had problems with the bolts before?
 
Jul 6, 2013
528
0
West Yorkshire
Yeah damage could have been a lot worse. Don't know how it didn't to be honest. Yeah eastbound between 26 M606 and 27 Birstall.

Could be worse could of frazzled my piston ;)


Sent from my iPhone using Tapatalk

You know what happens when worse things happen though don't you, you build it a lot better. Don't replace, upgrade I've always said. Ha ha:happy:
 

markrich

Active Member
Sep 16, 2012
249
0
Stoke
Was going to fit my sportline springs today but unfortunately didn't make it past the drivers side!
All the bolts around the hub and strut were well and truly seized. Wouldn't budge with power tools or even with a length of scaffold as a lever. Looks like they'll need hitting with a torch to heat them up. Anyone had problems with the bolts before?

Yea had to heat one side of mine up
 

wylie86

Active Member
Feb 2, 2015
3
0
Aberdeen
Fitted shim on gearbox to stop the whining on deceleration (which worked a treat) and resealed all the doors with some butyl strip. :)
 

Rob_Talisman

MKII CR FR 170 FL Stage 2
Sep 2, 2013
811
0
North East
A. Will halfords have touch up paint for this ? And if so

B. Should i use it or wait n get it from seat?


Sent from my iPhone using Tapatalk
 
Progressive Parts, performance parts and tuning specialists