Seat Ibiza MK5 SportCoupé R - RNS 315 ON

[Marco.cupra]

Hi
Sorry for the delay responding.
I have no tab, sorry: (.
I'll tell you how I did:

I had to cut the air intake Audi A1 about 50mm because pounded the air duct inside.
Then there is a ring that serves as a stop for the original air intakes that I had to chop otherwise does not.
Took some work but I managed

 

[Hawkins94]

Looks good mate and those brakes are excellent! How are you ringing the coil overs? Was thinking about getting some but don't want to loose all of the ride quality.

 

[Marco.cupra]

Looks good mate and those brakes are excellent! How are you ringing the coil overs? Was thinking about getting some but don't want to loose all of the ride quality.

Hi.
Sorry late answer.
This Ap are great, absorbs very well the small road irregularities, cornering the car is safer, it feels better to grasp.
I advise you

 

[Marco.cupra]

Hello again folks.
Further back I put a video of when I got to test lights climatronic only if the functions were correct and that all the buttons were working ... everything working .
Today , after lunch , so I decided to get to work and try to apply it permanently .

As stated previously , the fittings of the chips are exactly the same ...

well ... as tightening the screws.

already tight

Then came the more laborious , hit the rim ... everything clean behind and hit contours ...

No work and dedication you have nothing ... see : mrgreen :

​

 

[Marco.cupra]

Good morning!
Here are the photos of the wheel Cupra Ibiza 6J Restyle ...

​

First impressions:

- Still makes me confusion of the right of the steering wheel when I have to turn over the management: mrgreen:
- The ergonomics are much better than my original
- I have a feeling to be at slightly rough to the touch, but maybe it's for the benefit of the friction that is created by touching with their hands and thus there are no problems of "slips"
- The part of the glossy black bezel would not be better with brushed chrome to better match the interior (but I also like that)
- Flywheel beautifully beautiful: mrgreen:

 

[mjstokes85]

Awesome car!! Loving these wheels on the MK5

 

[Marco.cupra]

Awesome car!! Loving these wheels on the MK5

Many thanks mate

 

[Marco.cupra]

Hello guys ... car is in good health
News soon .... .

 

[Marco.cupra]

It's almost done .... ....

The 315 RNs must get more 3mm into the console and so it is flush with the dash, I have to shave (in depth) that has the back of the console in the background ... as you can see, was centered with the console as he had predicted
Only after that will work the frame to close the console

See you soon​

 

[Marco.cupra]

Fresh from being placed ...: mrgreen:

Lack of time has delayed completion of the work but there could then put the best photos and a video of the radio to work.

Cheears​

 

[marko6jpt]

The best we have in PT
Awsome project

 

[Marco.cupra]

The best we have in PT
Awsome project

Thanks mate

 

[Marco.cupra]

Here are some more pictures of the inside

 

[adonshoko]

Amazing

 

[stan_pt]

Hi Marco i m from PT also where did you get your Cupra Bumper?

 

[Jacek785]

Hi Marco is it possible to upload photos again, I`m very curious about Your work, but I cant view the pictures.

 

[Marco.cupra]

Hi Marco is it possible to upload photos again, I`m very curious about Your work, but I cant view the pictures.

Working on that mate

 

[Marco.cupra]

 

[Jacek785]

Thanks for photos. The car looks amazing.
I`m trying to fit A1 air vents, but i`m stuck i need to push it about 1cm more. I`m curious did You cut the air duct or the cover plastic. I cut cover plastic but now i think that the air duct it self is a problem. I could shorten the vent a little more but i`m very close to the limit becauce of the four plastic parts inside the vent. Could You give me a hint?