WeeG Stage 3 APR Leon Cupra R mk2 TFSI (Banana) 436.5bhp 438.2lbs/ft torque

[flieger]

Saw the results that were posted over on VWVortex by Arin for your tune. I had the luck to BETA the v3.3 and supply info for the revision to the v3.31 on the Golf R. I'm sure they are both very similar and your experience was much like mine. What was the overall increase from your REVO calibration to APR 2+?

 

[WeeG]

My overall calibration difference from revo to my 3rd revision of apr v3.31 was 25.3 hp and 63 lbs ft torque

 

[wild willy]

My overall calibration difference from revo to my 3rd revision of apr v3.31 was 25.3 hp and 63 lbs ft torque

That's a considerable difference.....must be able to feel that in the butt dyno.

 

[Al]

Which run are you comparing it to G?

 

[WeeG]

The last runs with the car before I changed dude. 351 bhp 323 lbs torque on 9,5,5

 

[Al]

Before the new maf and decat?

 

[flieger]

My overall calibration difference from revo to my 3rd revision of apr v3.31 was 25.3 hp and 63 lbs ft torque

Very nice power increase...I knew the latest version of this software would shows gains...but to see that kind of number is huge! Were you working directly with the guys at APR?

 

[WeeG]

Very nice power increase...I knew the latest version of this software would shows gains...but to see that kind of number is huge! Were you working directly with the guys at APR?

Yeh over the last fortnight we have been logging and altering for an extreme final calibration for cars with all supporting mods

 

[WeeG]

No bud run was done with new MAF sportscat

 

[WeeG]

Here is the final revision graph after a fortnight of tinkering on APR's part this is version 3.31 on a heart break roller that had never seen over 364 on any ko4 prior to this

V3.31 will be released in the uk soon

 

[big eck]

Impressive. Very impressive. The in gear pull must be superb.

 

[bondbill2k2]

Random but did you spray the back of those seats as i've only seen them plastic greyish

 

[AndrewJB]

Random but did you spray the back of those seats as i've only seen them plastic greyish

Nope standard LCR seat's

 

[WeeG]

Bought these and getting fitted when I'm back from offshore on the 25th

 

[big eck]

What the hell is it???

 

[WeeG]

What the hell is it???

It's the runner flaps delete bud. The flaps restrict airflow on the 2.0 tfsi. For full potential APR advise the machined inserts removing the flappers and upgraded software. Should see an extra 10 bhp 10 lbs ft torque

 

[WeeG]

THe leon is currently sitting at fellow SCN Al's house while im offfshore. The car decided to crap its pants in aberdeen rush hour traffic. Pedal t the floor and no gears. Turns out to be a clutch fluid metal hose popped. SO Mikee another fellow member is fixing it for me coming ack, on the 25th the runner flap delete mod will be done with assosciated map and the inlet valves will be cleaned as the inlet manifold will be off

 

[big eck]

Get a pic of the valves man, wanna see how bad they are compared to mine.

 

[WeeG]

No hassles dude

 

[Al]

THe leon is currently sitting at fellow SCN Al's house while im offfshore. The car decided to crap its pants in aberdeen rush hour traffic after getting its arse handed to it by a salesman in a 1.6 hire car round the slip road and at a set of lights . Pedal t the floor and no gears. Turns out to be a clutch fluid metal hose popped. SO Mikee another fellow member is fixing it for me coming ack, on the 25th the runner flap delete mod will be done with assosciated map and the inlet valves will be cleaned as the inlet manifold will be off