Benzys TDI FR

Benzy

Active Member
Jan 30, 2010
1,220
3
Big weekend for the Leon.

I took a drive over to my mates place yesterday to do some work and give the motor a well earned wash.

Started by jacking her up and ripping the standard RARB off


7CDCCE61-17F4-4511-BFE2-1C2E17F5484F-5859-00000301CFC6E1F4_zpsea833b29.jpg



To be replaced with a white line model with poly bushes


B238567C-23DE-4937-90A1-8192B9D91E4C-5859-00000301B667B760_zps35100515.jpg



Can anyone tell me weather this is on the hardest or softest setting? It's being jacked up next week when some bolts of the right length get delivered haha so I can adjust it then if I need to


59DD3CE2-2BB6-4617-8FED-A6C21BD0DE3F-5859-00000301BB06916F_zpse7596beb.jpg



Then today I got up and took her to a place just down the road with a HAWK EYE laser alignment kit and had my wheels all adjusted.

Before


AE60C272-3644-4B15-BC94-14A0EAA0F116-5859-00000301A9C71E57_zps32356aff.jpg



After


BEB19590-5DAC-4813-AB5A-BA452B38B4D3-5859-00000301AFBB8FB5_zps0550b8b8.jpg



I gotta b honest I can't feel any difference haha but it must have done some good.

Then I got home and set to work on my intake.

Ripped the old box out....it's MASSIVE :O then fitted my own intake pipe and cone

Before


C875DF93-9E37-4132-B050-364D8ADDC70C-5859-0000030193AD0CFE_zps24f52c52.jpg



After


7C2957D2-0D40-4109-9AA5-78134381E6F8-5859-00000301A38EE519_zps23823055.jpg



Let me know what you think guys
 

Benzy

Active Member
Jan 30, 2010
1,220
3
Not that I have noticed mate, ill have a listen out for it and see. Just sounds like I have a very heavy smoker (whos just been for a run) in my glove box haha
 

Lumby

Active Member
Jan 26, 2012
343
0
Yeah I bet, I might have to look into this. You say you didn't feel much a difference though?
 

Benzy

Active Member
Jan 30, 2010
1,220
3
Yeah I bet, I might have to look into this. You say you didn't feel much a difference though?

Sorry I ain't replied in ages. I have started feeling the difference now, I don't think I was trying hard enough ;)

In a small update iv just had a delivery :D

F258E053-C741-4614-890F-2AE3F0DD7D80-10626-0000063034A80E73_zpsee21eae4.jpg


Milltek dpf delete pipe ready for fitting and stage2 remap :D
 

JODmeister

Active Member
May 9, 2013
69
0
Some nice work there Benzy.....I enjoy these posts with continually updated progress pics. Nice 1.

What paints did you use on the engine cover and badges?
 

Benzy

Active Member
Jan 30, 2010
1,220
3
Some nice work there Benzy.....I enjoy these posts with continually updated progress pics. Nice 1.

What paints did you use on the engine cover and badges?

Thanks man. I like to try and do break downs with pictures as it helps people if they want to do it too.

I just used plastic primer and top coat mate. B&Q do plenty of it
 

Benzy

Active Member
Jan 30, 2010
1,220
3
Decided to take my egr valve and inlet manifold off and clean it all up today. I'm getting the egr deleted along with the dpf so I thought getting all the crap out would be a good idea.


Before


4433FD16-8EA8-4DC7-8A78-DF669316854A-14029-000007CE5D135422_zps3bdc3017.jpg


969340C4-A744-4EB7-AA05-04BF8C669227-14029-000007CE7382416E_zps6f9445c9.jpg


35C1A80C-C436-4C9D-9EC8-DFD8C41EDA0D-14029-000007CED892B627_zpsa79d5bcb.jpg



And after a lot of scrubbing


A0B572B7-29A5-4873-9F9F-3C3DB2A1A9D3-14029-000007CE796F942A_zpsfc45592f.jpg


48D37306-760C-4ADC-BF1B-CFA70294CD7F-14029-000007CE8056D70C_zpsd18cb17e.jpg


584FC62A-2513-4DCC-9B79-37EC6EC61982-14029-000007CEDF5A9C3A_zps55cd424d.jpg


Then made up a blanking plate out of some spare sheet ali and rebuilt it all fitting the plate to the egr pipe blanking it off. No engine management light yet but I'm sure it will b soon :)
 

JODmeister

Active Member
May 9, 2013
69
0
Got myself a nearly new engine cover, but it's Skoda badged. Did you manage to get a SEAT one and where from?
 

Benzy

Active Member
Jan 30, 2010
1,220
3
So after a trip to Mansfield to go and see the guys at shark performance I was not left disappointed.

Dpf and egr delete with a stage 2 remap. Great service by the guys up there. It didn't go on the rollers, instead I went out with Ben and it was mapped on the road, a few trips down the bypass later and he estimated it was running just under 220 bhp and 450 Newton meters.

Couldn't praise them enough up there and my only regret is not getting this done earlier
 

Roganjosh

Active Member
Jan 1, 2013
445
0
Hows the map, is it smokey being stage 2?? Road mapping is always better, my tuner said even when he had his rollers he would still nearly always finalise the map on the road to perfect it
 

Benzy

Active Member
Jan 30, 2010
1,220
3
It's not too smoky, only under full throttle. I can drive casually and there's no difference to standard :) I'm really enjoying it! The noise is just immense and I love hearing it :) I'm gonna try and sort some videos out soon
 
Genuine SEAT Parts and Accessories.