Looking good ladseen your car at the show and see you doing laps of the car park on sunday night
Thanks dude, seen yours at the show too, looked really well! Oh i never noticed you in town, i have to keep a look out and know your reg now.. BFZ?
Leon TDI Stylance (Small Update Page 3)
- Thread starter Arnie-Wilson
- Start date
Thanks dude, seen yours at the show too, looked really well! Oh i never noticed you in town, i have to keep a look out and know your reg now.. BFZ?
Car looked well at Castlewellan mate
Thanks Jonny, got a look round yours lad an it sits well!
Mine doesn't sit well enough lol, needs lowered more and wider adapters at the front. But thanks!
But thanks! kenny 26
Guest
Your car is looking well. I see you in Portadown all the time... Out of interest who is your mate that sprayed your bumpers as I have 2 fr bumpers that need sprayed? Im also looking to do the BTCC exhaust with the fr bumper, as there is just too many leons with BTCC kits over ere lol
toledo.2.3.v5
Guest
Called Ian Montgomery, you will see him in a white glanza about Portadown. I think its a better choice going with the fr bumpers and BTCC exhaust, nice to stand out abit. Want me to get you a price on the 2 bumpers and exhaust fitted?
Thanks dude
kenny 26
Guest
Yea that would be great if you would. Im still on the hunt for an exhaust atm. Did he cut out your rear apron for the other side of the exhaust aswell??
Yea lad, made a template an copied it on the other side. Done a brill job of it too! I got lucky an mine came off a damaged leon, told there £350 new! Wild money. If you want a look round mine don't be afraid to pull up in town an i will let you see all
Will ask him here an give ya should on facebook with a price
Will ask him here an give ya should on facebook with a price
kenny 26
Guest
Yea lad, made a template an copied it on the other side. Done a brill job of it too! I got lucky an mine came off a damaged leon, told there £350 new! Wild money. If you want a look round mine don't be afraid to pull up in town an i will let you see all
Will ask him here an give ya should on facebook with a price
Good job! Aye £300 from sere motors. Im keeping an eye out on gumtree and the local breakers for an exhaust but nothing yet :-( lol yea i shall pull up beside you some nyt and see Wat the crack is Haha
Another wee update
Few more wee bits an pieces have been updated to the Leon..
Hard to notice in the picture but there's 5mm spacers on the back wheels and also longer wheel studs
Bought a 'stubby' Ariel
[/IMG]
Tinted the side repeaters. Made a big difference to the look
Also tinted the side of the front windows with a light tint. Hard to notice in the picture though
Few more wee bits an pieces have been updated to the Leon..
Hard to notice in the picture but there's 5mm spacers on the back wheels and also longer wheel studs
Bought a 'stubby' Ariel
Tinted the side repeaters. Made a big difference to the look
Also tinted the side of the front windows with a light tint. Hard to notice in the picture though
Small update
Got bored one day and decided to fit a boost gauge to the car with help from a friend. Wanted to be different so decided to fit it in the driver air event..
Whats your opinion?
Looks great, always wanted to do this but never got round to it. Do you have a link for all the bits and pieces needed please with a quick how to?
Thanks
Afriad not, i just landed down at my friends and says can we fit this, 2 and half hours later it was finished. I will try explain it from what i remember doing..
Remove the front face of the vent, i ripped it out as im going to need a whole new vent if i decide to take it out..then there are 4 wee clips holding the vent in, they have to be pushed into the vent for you to be able to pull it out.
Once vent is out, we got a metal sheet of steel (3mm thick i think) and cut it to fit the boost gauge face and the out edge of the steel to fit into the vent surround.
Screwed the boost gauge together and fitted it back into the car.. all hosing and wires push in first and pulled down to where the OBD socket is located.
We then drilled a hole, Just up from the clutch pedal and it comes out above the where the turbo is located in the engine back (take this slowly as possible and be careful not to catch any wires)
Drilled a hole in the intercooler pipe for the boost gauge to read from. Fitted a tyre valve for this to be achieved and connected the hose to the tyre valve.
To light the gauge up we wired it to the back of the radio, so its always lit when the car is on.
That's basically it, i hope that helps abit
That definately helps, just need to see where I can find that gauge from, and do you have a pic of the pipe connected to your intercooler pipe?
Last edited:
Similar threads
