I have that! Is it easy enough to actually disconnect/take off the engine mount?
jack up front end of car on axle stands
remove plastic engine tray (25 torx bit)
the dogbone has one bolt (19mm) holding it to the subframe
at the gearbox end, it has a small bolt fixing it to a black bracket which is fixed to the gearbox with 3 bolts (17/18mm). you'll need to remove these 3 and remove the dogbone and bracket together to get the dogbone out of the subframe
4 bolts total
to get the old bush out, the easy way is to feed a hacksaw blade through one of the holes and cut through the plastic outer to release the pressure holding it in and you can literally push it out with your fingers