Stance Thread - How Low Are You?

[PhilW]

Ok, heres the deal, post up how low you are or just ride height.

Measure from ground to arch above the wheel through the centre cap and post up what you got with a pic if you want and spec so people know what stuff gets what ride height.

Ill do mine in a bit.


FYI:

Standard suspension - standard cupra wheels - standard 195-45-16 tyres = 620mm Ride Height

Standard suspension - 17" wheels - 205-40-17 (most common 17" aftermarket tyre) = TBC

 

[tom w]

alright mine is sitting at 600mm from floor to tdc of arch on a supersport adjustable kit, just about right for me as there is too many speed bumps round here

 

[Mat]

guessing you've recently slammed yours some more then phil?

 

[PhilW]

guessing you've recently slammed yours some more then phil?

Not at all Mat, just wondering more than anything after seein some awesome stance threads on Vortex.

 

[PhilW]

Im rocking 610mm front and back. 17" wheels - 40 profile tyres - FK Silverlines.

Looks like....

 

[jonnyblease]

that does look awesome

 

[s1l3nc3r]

Looks great...

Not that id be expecting anything else...

I think im at 580mm may be a bit lower now though with the standard cupra rims...on AP's. will get a pic up when i can...

 

[AlexGSi2000]

Mines sat pretty high on the standard cupra r suspension... think my next mod may need to be coilies.

 

[s1l3nc3r]

Mines sat pretty high on the standard cupra r suspension... think my next mod may need to be coilies.

 

[PhilW]

Dont forget measurements!

 

[Robbie C]

Nice thread - I'll measure mine this weekend *childish giggle*

 

[ibizacupra]

580mm on badgerwagen

 

[PhilW]

580mm on badgerwagen

What tyres and wheels bill?

 

[daves ibiza]

fair play phill it looks awesome

 

[karls cupra]

650mm rear and 700mm ish on front fitted with h&r cup kit springs, with bilstein shocks ..

 

[Leigh_o]

Measurements -

Front 465mm 15x8" Oz Turbos 185/45/15 Nankangs.
Rear 490mm 15x8.5" Oz Turbos 185/45/15 Nankangs.

 

[Robbie C]

Near enough 580mm on every corner, standard Cupra rims, 45 profile tyres:

 

[Riko]

Just been out to measure and piccy. Sitting a fairly even 560mm all around. 16" SuperT's with widdle stretch 45 profile.
Front

Rear

 

[DaNnY_LaD]

Im not too sure how low mine is but il measure it later...

 

[tom w]

danny is yours a rockingham edition or just the graphics???