how i fitted my uni intercooler

[20 valve ted]

inside if you dont mind im stuck at home but my gf has my car.

 

[mav12]

mesured the outside of the steel tube and its 57mm

 

[20 valve ted]

nice 1 mate il get it ordered. thanks

 

[TJenkos]

Thanks for the guide!

Stage 1 completed tonight, getting the old one off!

 

[motty_90]

Im fitting mine atm. doing it with the hoses at the bottem. its a pain in the arse but slowly getting there.

 

[motty_90]

got mine on today. il take some pic's 2moz.

 

[motty_90]

 

[Matt S!]

Looks a tidy fit !!

 

[motty_90]

cheers mate. managed to run the pipes high up aswell because i found another bit of pipe.

 

[danny_dub]

hi guys!

Fitted mine over the weekend and really happy with it.

The pipe that goes into the inlet keeps coming off under pressure. Its where the little sleeve is.

Any help or ideas??

thanks

 

[chaazza]

were does the left(as your looking to the front of car)pipe go to i no one comes of your inlet but my pipe goes over my engine do i connect other end to this help please

 

[s1l3nc3r]

Behind the back of the cooler and under the car where you took the oem charge pipe off...

You should be able to work it out from this picture

Main pipe in picture is from the left side with the black 90deg bend on it...the one behind that is from the right side of the cooler.

 

[chaazza]

Behind the back of the cooler and under the car where you took the oem charge pipe off...

You should be able to work it out from this picture

Main pipe in picture is from the left side with the black 90deg bend on it...the one behind that is from the right side of the cooler.

so i have to take the charge pipe of ? wat about the hoses goin into it

 

[s1l3nc3r]

Your boost pipework from the uni fmic runs from the turbo at the back of the engine...

Through the chargepipe over the engine to the front and comes out infront of the engine under the car where it gets fed to the intercooler from left to right out the other side behind the passenger side fog light then up into the inlet mani...

 

[DaleGT]

all thread i know but thanks for the guide

 

[T1200Y]

Brilliant post, followed this step by step and done mine with my mate on the weekend, got it custom sprayed to camo blue, would post the pictures but kinda new to this and don't have a clu how too .. thanks again

 

[sparkie1984]

glad its helped a few of you out

 

[venner]

Great guide just read through it as interested in getting a new intercooler for mine.

 

[DaleGT]

mate ive just got a fmic, what did you use to fit the intercooler to the crash bar?? i dont seem to have anything in my box??

or if anyone else can help??

 

[chris_200120vt]

i used some flat bar and fastened that to the two bars up from the crash bar. put a bend in at 1 end tread the bar through nut on top and bottom.