Boost Gauge No BUZZ

[Smee]

Hello

Just ordered my Boost Gauge. got me an Auto gauge smoked face 270 degree jobbie. smoked face and was the closest match the the dash i could find.

it comes with a fitting kit but i have seen that i need a No Buzz part from reading on here.

where do i get an Inline No Buzz part from?

Lee

 

[andycupra]

i think you may mean a different type of 't piece' that stops gauges buzzing or resonating.

a very quick search and...
http://www.seatcupra.net/forums/showthread.php?t=205403

http://www.awesome-gti.co.uk/product.php?xProd=6778&xSec=340

 

[Smee]

yea but thats an T Piece. i am after an inline one.

Lee

 

[Smee]

i think the Autogauge ones come with a restrictor already... is it a little brass bit in teh end of the t piece?

Lee

 

[andycupra]

yea but thats an T Piece. i am after an inline one.

Lee

and how do you intend to fit this guage? - i suggest that you will require a T piece at some point.
Or as said in the threads ive linked to, blank off the T piece and fit it as an inline part. - although some may say you may as well resrict the pipe with something cheaper, such as a cable tie.

i think the Autogauge ones come with a restrictor already... is it a little brass bit in teh end of the t piece?

Lee

the little brass bit you refer to is likely to be the part you should have used as part of the way the pipe is attached to the gauge.

 

[Smee]

i will be getting a jabba egr pipe so i dont think ill need the T piece and that will be my feed from the boost pipe.

if the t piece supplied has the brass bit in ill fit it. if not i need to find one that is an inline one

Lee

 

[Damoegan]

You could still use the T and just blank off the end your not using, that way you still have the restrictor..