Quickshift......... What do you reckon?

[karizma_fas]

is the quick shift easy to fit on LCR?

Cheers

 

[Lodgey180]

Peice of cake mate

take your airbox out and you will see it .. Very easy

 

[b1nuzz]

It takes a little bit of wiggling, and persuasion, but it is straight forward!

 

[marshyc]

would this fit on a tdi like the forge ones?

Not according to their website Quickshift

 

[BoomhaueR]

I am going to put mine on today but don't have a torque wrench. Do I really need to go and buy one or can I get away without it?

 

[LEE69]

Just tighten it up.

 

[cupra-rich]

Not according to their website Quickshift

just fitted this to my tdi. no problems selecting any gears totally love this mod.
bit of a b*****d to get off,needed abit of wood under casting in neutral gear then a slight tap on the spindle did the job.

 

[greesha]

Mine came off in just about 10 seconds without any problems .

 

[marshyc]

just fitted this to my tdi. no problems selecting any gears totally love this mod.
bit of a b*****d to get off,needed abit of wood under casting in neutral gear then a slight tap on the spindle did the job.

Bonus

 

[paul-murphys]

just fitted this to my tdi. no problems selecting any gears totally love this mod.
bit of a b*****d to get off,needed abit of wood under casting in neutral gear then a slight tap on the spindle did the job.

5 min job for some

no dirty diesel for me

 

[BoomhaueR]

Argh Mine refuses to come off the spindle! Need to get some penetrating fluid from halfrauds and soak it overnight me thinks.

 

[LEE69]

Just raise the shaft up a touch, support it, and tap the shaft down.

 

[cupra-rich]

5 min job for some

no dirty diesel for me

 

[dg-1984]

Just purchased one of these, will fit once it arrives

 

[dg-1984]

Part arrived yesterday and took 10mins to fit. Excellent bit of kit, adjusted it to shortest shift and it feels great.
Dont need to remove anything to fit. I put it in neutral to fit, can move a bit when working on it but just move back with hand. Remove left hand linkage, by pressing and sliding the top clip off the linkage, dont lose will need again. Lift off llinkage, then use a 13mm socket bit to loosen the bold holding the shifter in place, I lifted the shifter up and placed a larger socket bit under it and tapped the spindal a few times with a hammer to loosen it. Remove old shifter and replace with nice new shiny one, putting back into same position, tighten up fit linkage and then clip. Job done!!!

Very happy

 

[Phillc]

Has anyone had any problems with this i ordered mine over a week ago, emailed them had a reply from "Brent" who said "Item posted" when i asked when ..nothing they wont reply to my emails now then they had the cheek to ask for my feedback, everyone seems to have received there's quite quickly.

 

[Cupra TDI 150]

Has anyone bought one of these recently?? Just been on ebay an they are listed as £58 but in the description it sttes they are on offer for £30. Phillc did you recieve yours ever or did you manage to resolve theissue??

 

[jonesy118]

they're not on offer anymore, I just gave them a call. He said he hasn't had time to change the body of the advertisement.

Think I'll be getting one from THS, as they're the cheapest around now at £50

 

[simonj]

Just got this reply from them - pity

Hi,
yes sorry about that, that should have been changed long ago, these are no longer on special offer and are priced at £57.99.

Keep looking though as they may go back on offer soon.

Regards
Kieron, Ebay sales
www.compbrake.co.uk

 

[Cupra TDI 150]

Got the very same message myself.